I have purchased a Dish antenna which is proudly sitting on the roof, aligned approximately to the Optus D1 azimuth and elevation. I have a Pansonic TH-24A400Z TV purchased second hand and which is  waiting for collection. What I need to know from somebody, please, is whether I need a blackl box device to match the dish LNB into this particular TV or not. Nobody seems to be able to tell me. The LNB Output is 950Mhz to 1450 Mhz. Thanks in anticipation....

Views: 406

Reply to This

Replies to This Discussion

It doesn't have a sat tuner so you will need either a Sat Box between the Dish and the TV or UHF antenna direct to TV..

https://www.panasonic.com/nz/support/product-archives/product-archi...

Thanks, that is what I suspected. I feel silly having bought the TV on trademe only to find out that the TVs of this family are pretty well rubbished for picture quality by Consumer in its latest magazine review. When I receive it I will try it out and maybe write it off as a bad decision. Further to your comments, we have only satellite coverage here in the far north, so UHF cannot be used.

Reply to Discussion

RSS

Latest Activity

Satellite Networks Motueka replied to david adamson's discussion Prime TV Los on re-tuning
"Simple. Replace the LNB. Probs an old Sky one,"
12 hours ago
david adamson posted a discussion

Prime TV Los on re-tuning

Recently I had a reception issue that was only resolved by powering down then restarting my dish…See More
16 hours ago
Josh ✔️ replied to James Eaton's discussion Freeview Reception Waikanae
"Thanks for getting in touch, we were notified Sunday night by the transmission provider Kordia of a…"
Sunday
Gavin Barbour replied to James Eaton's discussion Freeview Reception Waikanae
"Same in Christchurch - must be a national problem,"
Sunday

Connect With Us!

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service