When I set a programme to be recorded on say TV 1, it automatically records the same programme on TV 1+ as well so I end up with 2 recordings on the same programme. This of course is a nuisance when I then want to record another programme at the same time.

Can anyone please advise how to set my Samsung Smart TV to record the programme on just one channel please?

Views: 619

Reply to This

Replies to This Discussion

Good Morning Maxine, 

Recording from the guide (or EPG) uses something called "alternate instance" which always chooses to record the original / first screening of the selected programme. 

The recorder would see the same programme on the Plus 1 channel as being identical to the one on the original channel and would always opt to record the show on the original channel and skip the one on the Plus 1 channel (unless there is a prior conflict in your booked recordings).

The advantage of recording off the original channel is that broadcast quality is often better, leading to better quality recordings. For example, most prime time shows on TVNZ 1, TVNZ 1 and Three are broadcast in HD via UHF; while the same shows on the Plus 1 channels would be broadcast in SD.

However, if you do wish to record from the Plus 1 channel, you can do so by manually setting the timer. Please refer to your device manual for instructions on how to do this

Let me know if this helps, 

Josh

Thanks Josh
Unfortunately I don't want to record on both channels. I only want to record on one but if I try to delete one channel, it deletes both

There might be a manual timer record on your Smart TV,  to only set the TV to record at the time and date on that particular channel usually this can be done on the built in Guide rather than the Freeview supplied TV Guides. 

Josh

Reply to Discussion

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service