ons. Freeview approved satellite receivers automatically assign the correct regional channels to the channel numbers.
As the openbox isn't approved it won't do it. You'll need to manually delete other tv1's. The openbox operators manual should have a section for editing channels.
…
sh,
From what you have provided you will be able to set up freeview for this, and with approved receivers it may pick up your LNB Frequency automatically.
From your Freeview Box RF Output you will need to run a cable from the box to a splitter then split the cables to the other TV's this method means that only your 2 TVS can only view the channel on your single freeview box,
Do you other Satellite Boxes or only just the TV's ?
Kind RegardsJoshua
…
ed additional information on his drop box about this problem and you can access this here: https://www.dropbox.com/sh/99ijdy2d5vkvke5/AADVgsgjzpYorVRaQyUPKxVMa/ZMX-7500%20No%20signal.pdf?dl=0
Please do let me know if this helps the issue, if this does work it is recommended you purchase a new LNB from an installer or Trademe and get the current one replaced. (additional info on what a LNB is can be found here: http://freeviewforum.co.nz/forum/topics/freeview-satellite-adjusting-your-lnb
Joshua
…
like Optus D2 for example, To check this, on your installation menu of your unit try find other satellites to scan for channels, they may indicate signal on those. expecially if the Satellite finder has a tone.
2) If you are defiantly sure, sure that the dish is on Optus D1 then it might be your LNB that needs to be adjusted, Ensure that the cable that is inserted into the LNB is pointing down at 8 o'clock, as that is the usual angle which Freeview channels on both mux's come in clear,
Others may have other ideas but if you are stuck, or have solved the problem, then please let me know :-)
Cheers!…
in the bedroom.
Any work arounds? Why would they sell an adaptor if it doesnt transfer a signal, seems weird
Biggles said:Sounds to me like the antenna connection in the lounge is connected to a satellite dish and the connector in the Bedroom is either connected to a TV antenna or runs to the lounge to pick up rf out from a STB. The STB must be connected to a satellite dish.
…
ilable already though not Freeview approved and not many in NZ. I have one on order from China which has Satellite and UHF Tuners which will work worldwide plus it's a full Media Player, does TV streaming online, and under $100. It's basically an Android based computer with Tuners and much smaller than MySky Boxes. NZ media are just so far out of touch with technology.
P.S. I see from your profile you already use a DVB-S2 Rx - the Ultraplus F9000HD.…
can use the search bar that is located on the top right section of the forum!
Here you can search anything relate able or if you want to browse content then it’s there for easy access!
If you have a Satellite Receiver and want to find out topics about that you can simply enter in "Satellite Receiver" and all topics that have that keyword will appear!
Enjoy!
…