Replies to This Discussion

Permalink Reply by forumuser on March 21, 2020 at 21:58

Can you take a photo of the splitter or confirm if the splitter label reads ALL PORTS POWER PASS  or if you have one that says ONE PORT POWER PASS 

Cheers

Josh

• ▶ Reply

Permalink Reply by andrea joy smith on March 22, 2020 at 11:53

• ▶ Reply

Permalink Reply by andrea joy smith on March 22, 2020 at 11:54

This is what the shop said would be suitable but thinking its not....

• ▶ Reply

Permalink Reply by willis on March 23, 2020 at 17:08

go get an amplified splitter

• ▶ Reply

Permalink Reply by andrea joy smith on April 4, 2020 at 13:38

Thanks, Will do when shops reopen!

willis said:

go get an amplified splitter

• ▶ Reply

Permalink Reply by Linda Young on September 12, 2020 at 15:09

is there an update to this as I am having this issue with ours and we have 2 TV's with 2 freeview boxes on a 8 way splitter in a 2 storey house, if one freeview is turned off it the other won't go just says the no Signal so have to have both on for the TV to work downstairs, if both TV's and  freeview boxes are on the downstairs TV crackles and pixilates, is there a way to stop this happening... had a similar problem in our last house and had a booster put in, would we need to do the same again ....photo of the 8 way splitter

• ▶ Reply

Permalink Reply by andrea joy smith on September 13, 2020 at 13:30

Hi, haven't had a chance to get someone out but been told need amplified splitter but could also be quality of existing cable in the house. If it pixalates have just been unplugging the aerial from back of TV and replugging and seems to be working. Technology so annoying at times!

• ▶ Reply

Permalink Reply by Linda Young on September 13, 2020 at 14:05

ok, thank you

• ▶ Reply

▶ Reply to Discussion