Just recently my s8200 has stopped recording most programmes added via the EPG schedule. All set up to record and then a message will appear in bottom right corner of screen, "cannot start recording". Can confirm that nothing else is recording at time, other than time shift being operational. Also, think it's all connected, sometimes when trying to change channel a message appears "tuner engaged for recording" and impossible to change channel unless press stop on remote to kill time shift (nothing else recording at time). Do I have an issue with my disk drive? The supplied loop cable that connects to the tuner outlets on the rear is connected as expected

Views: 87

Reply to This

Replies to This Discussion

Hi Nick, 

Thanks for posting your issue, 

I would recommend having a chat to the DISH TV team regarding this, you can reach them on the below methods: 

https://www.dishtv.co.nz/index.php?route=information/contact 

Thanks, Josh

Thanks Josh for pointing me to their website. Much appreciated

Reply to Discussion

RSS

Latest Activity

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

2. Once you've signed up, you'll be able to:

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service