Wondering if anyone has come across this -

I have 2 Dish units in house 1 x S7090PVR and 1 x S7070.

I am having problems with S7070 I am randomly loosing audio/signal on this unit however if go and turn on S7090 PVR all tv is received fine.

Views: 750

Reply to This

Replies to This Discussion

That would indicate that the S7090 is powering the LNB.

On the S7090

Press the INFO button twice and note what the Signal Strength and Signal Quality values  are and post result here.

Try turning LPM in stand-by to OFF

  1. Menu
  2. Instalattion
  3. System Setting



Paul said:

That would indicate that the S7090 is powering the LNB.

On the S7090

Press the INFO button twice and note what the Signal Strength and Signal Quality values  are and post result here.

Try turning LPM in stand-by to OFF

  1. Menu
  2. Instalattion
  3. System Setting



Rosie said:

Hi Paul ..I have tried what you have suggested and still not having any luck..  when watching tv I have broken sound quality and picture is freezing.  when I look at Quality it is ranging from 78% then drops to 0% and the same with Strength ..I have no idea to why this would be happening as I have never had any problems before.

Just tried again your suggestion and scanned again seems to have worked this time do you know why I would start having problems all of a sudden and do I have to make this adjustment every time I turn the tv on? 
 
Paul said:

That would indicate that the S7090 is powering the LNB.

On the S7090

Press the INFO button twice and note what the Signal Strength and Signal Quality values  are and post result here.

Try turning LPM in stand-by to OFF

  1. Menu
  2. Instalattion
  3. System Setting

probably means the 7070 power supply if getting tired

Thanks sounds like will have to get tech in...beyond me to fix :-)

Reply to Discussion

RSS

LATEST:

You can follow the latest updates via Network Status here

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

2. Once you've signed up, you'll be able to:

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service