Replies to This Discussion

Permalink Reply by Paul on June 12, 2016 at 19:54

This may work.

How to retune a Satmax S1600 series satellite receiver

• Press Menu
• Select Advanced Installation
• Scroll down to set “FTA/CAS”
• Right hand arrow button to select “FTA”
• Highlight “NIT”
• Right arrow to select ON
• High light “TP set up”
• OK
• View coloured buttons on TV screen
• Press “GREEN” button, ADD TP.
• Right arrow to high light Right hand screen
• FREQUENCY, Enter 12519 on remote control key pad
• High Light Symbol Rate and enter 22500
• Polarity is HORZ
• “NIT” is ON
• Press the “RED” audio button on remote control
• Both Signal Strength and Quality bars should indicate around 70% or more
• New channels will be added automatically
• On screen says “Save Searched Channels”
• OK
• Exit four times
• You can now go to the CHANNEL EDIT menu and move the new channels to your favourite
positions.
• Press the RED audio button and MOVE will appear on the right hand side of the TV screen.
• High light the Program to be moved and press the RED button again to store.

• ▶ Reply

▶ Reply to Discussion