Updated 12/9/20

I identified the problem a few weeks ago and can now use Freeview if I want to, so I thought I'd post an update if anyone is interested.

I reconfigured the network so I could better see what the TV set was doing.  Freeview was attempting to contact www.googletagmanager.com and google analytics, which were both being blocked by my firewall because these sites are well known tracking sites.

Freeview may have always tried to communicate with these sites.  I hadn't looked before because it was working.  But it looks as though Freeview changes made about mid August, have either made contact with these tracking sites mandatory or just introduced it.  So, if I want to use Freeview I have to allow the TV communicate with these sites.

Updated 23/8/20

After many months of working perfectly I have now lost Freeview on this set.

I used Freeview last week to watch some content successfully. The next time I tried to use Freeview, I could not invoke Freeview with any of the keys. (red, green, OK, change channel, etc) Netflix working fine. Network test confirms set connected to the Internet.

I powered the set off at the wall for a few minutes. Freeview back and running again. Following day no Freeview again. Powered the set off at the wall again. No Freeview!

So now I cleared the cache. No improvement. Re-tuned the channels. All showing 100% or 97% signal. No Freeview.

Factory reset, re-tune channels etc etc. No Freeview.

Anyone else with one of these sets have recent problem with Freeview? If Freeview support are monitoring, have there been any changes to Freeview that might cause this set to stop working?



The set does support Freeview.

I am pleased to inform the tv is now displaying Freeview.

The step that got it working was to disconnect it from mains power for a period of time and after that it worked. I had previously tried clearing the cache under network settings but that hadn't helped.

I had disconnected the tv to get to the back of it to take photos of the serial plate.

I can only speculate why the tv failed to display Freeview, but it was the last feature I tried. I initially powered the tv up with no network, then a few days later connected it to a wireless network to investigate the smart features. A few days later I then changed to a wired network. Both wireless and wired were confirmed connecting through the router to the internet.  And finally I tried Freeview with no success.

After disconnecting and reconnecting the power the tv immediately had a network connection.  That maybe the crucial fact.

Thanks for the help.


I bought a Philips 65PUT6703/75 from PBTech during their boxing day sale.

The set is connected to broadcast tv with a uhf aerial.  Channels are showing 100% signal strength.  Network settings of the tv are showing an active broadband internet connection.  HbbTV options are all on.  It should just work.

But the tv will not display an aspect of Freeview.  No Freeview programme guide or mini menu when changing channels.

I now suspect that this model of Philips TV does not support NZ Freeview.

I'd like to hear if anyone does have Freeview working on this particular model of Philips TV and if so what firmware version and if there are any tricks to get it working.


Views: 1017

Reply to This

Replies to This Discussion

Excellent! Pleased to help.

Reply to Discussion



ALL PLATFORMS WORKING WELL, except a glitch with UHF transmission in Hawkes Bay affecting some JVC and VEON TVs.  See Network Status for more info and updates.

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2021   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service