New Firmware: MTV3600TD for scrambled names and reboot wakeup issue
Here's a firmware for the MTV3600TD customers who wish to rename the programme names garbage. In addition, it includes a final attempt at fixing the reboot at wakeup issue. A Customer has been testing this firmware over the weekend and has not seen the crash yet.
Magic TV MTV3600TD Firmware 6.08 beta:
http://www.magictv.com/nz/downloads/mtv3600_6_08NZbeta.zip
This is the MTV3700TD firmware 6.07 beta 6 back ported to MTV3600TD, so it has:
- Add iPhone/iPad/Android remote control app support (the MTV3600TD needs to be connected to the WiFi router as the mobile device does; if the WiFi router has a feature to "separate" a WiFi device from other devices it needs to be turned off)
- Add rename function for recorded programmes
- Add audio delay setting
- Add built-in volume adjustment (Settings -> Audio -> Volume; can also be controlled via remote control if the volume buttons have not been programmed)
- Add graphic prompt for radio channels
- Add favourite channels
- Add support for XBox 360 and MCE remote control (needs to be enabled by using Magic TV remote or the remote app first)
- An experimental change for the wakeup reboot issue
In case there is a serious issue with the 6.x firmware, please downgrade to firmware 3.20.
** IMPORTANT: Switching between 3.x <-> 6.x firmware REQUIRES a factory reset after upgrade.
--
Replies to This Discussion
-
Permalink Reply by Terry Pullen on
-
Will a Factory Reset on the MTV3600 refresh the HDD, losing recorded programs?
-
MAGIC TVPermalink Reply by wklie on -
The recorded programmes will remain. However, the settings, channels, and most importantly, to-do list will be wiped, so you'll need to go through the guided setup, and re-add all your bookings.
-
-
OK, that's good news. I was a bit concerned as an earlier post by Debbie King reported the loss of the programs on the HDD on a T1050PVR following a factory reset.
-
Permalink Reply by Leon on
-
have installed the 6.08 beta firmware for mtv 3600 seems fine apart from fast forwarding recorded programes i can get it to go 2x 4x 8x anything past 8x is a struggle try getting it to 16x and 32x is hard doesnt respond and while fast forwarding at lower speeds it freezes often never did this on 3.18 apart from this i really like
-
-
I'm having the same problem in fast forward and fast rewind. In fast rewind at 2x and 4x it stutters back and forward over the same few seconds of the program. I haven't done a factory reset yet and tossing up between doing so or installing 3.20.
-
-
I gave up on 6.08 tonight and loaded 3.20. Fast forward/rewind is fine again.
-
-
I don't have a wakeup-reboot issue. I recall that 3.21 was recommended ONLY for those with a wakeup-reboot issue, or maybe it was to do with Nelson. 3.20 is working fine.
NETWORK STATUS ALERTS
See Network Status page for updates.
Freeview On Demand Changes Read More Here
Latest Activity
Quick Links
© 2024 Created by Bel @ Freeview.
Powered by
