Replies to This Discussion

ZinwellPermalink Reply by Graham Wilson on May 28, 2016 at 16:12

Hi Marius,

I have run through this procedure 3 times (after a Set Default in the System menu) and it has worked correctly for me each time.

Before the procedure you will have 15 channels and 18 channels after

Have you got the most recent software version installed i.e. "System --> Information --> Enter  . It should be v1.23

The only other thing I can suggest, did you select "Full Scan" in Step 20?

Regards

Graham

 

ZinwellPermalink Reply by Graham Wilson on May 28, 2016 at 16:35

Just an additional thought:

When you select the new TP 12519 in step 8 do the Signal Strength and Signal Quality bars show 100% before you press the Green button?

I have just tried the procedure on two more HSMX200s and it was successfull on these as well.

Permalink Reply by Marius Van Der Spruit on May 29, 2016 at 14:23

Hi Graham I tried to redo the scan after insuring that the signal strength was at 100% before pressing the green button and went through all the channels but the end result was the same as before with Prime, the edge and TV4 plus still missing so I have not idea what to do next.........! 

ZinwellPermalink Reply by Graham Wilson on May 29, 2016 at 14:28

Sorry I can't suggest anything else to look at.   Maybe someone else can assist with advice

Permalink Reply by Greg blah blah on June 2, 2016 at 22:32

Hsmx is defunct. 09 9126789 hills info line .
Waste of time trying to update as per instructions. It will never get new prime transponder no matter what you do .

Permalink Reply by Greg blah blah on June 2, 2016 at 22:34

Why hills have update instructions for hsmx200 is beyond me , it wont ever work, they say so themselves. Bloody ridiculous

Permalink Reply by Greg blah blah on June 2, 2016 at 22:38

Graham wilson : how could you have updated 2 hsmx 200 recievers when hills say it will never be able to recieve that new transponder??. Please ring the number posted above and hear for yourself