We currently have a satelite dish (supplied by Sky). Although we are in Auckland, where we live is in a UHF black spot.  There are 3 cables connected to the LNB on the dish.  2 of these go to sky boxes in different living areas and one to a freeview box in a sleep-out.  I want to install another freeview box in a bedroom.  

I don't have suitable equipment to safely climb up to the dish, so i was wondering if it is possible to split one of the 3 existing cables 2 ways, with a 2 way splitter under the house, and leave the other two cables as they are.

I've attached a photo of the LNB taken from the ground to show the configuration with the 3 cables.

Views: 161

Attachments:

Reply to This

Replies to This Discussion

Yes

I have downloaded 2 images of the way mine are set up . The 1st shows 2 LNB going in and 2 going to 2 different floors the top goes to 4 freeview & 1 sky box and the bottom goes to a single freeview box , and the 2nd image is the splitter that has the 4 freeview and 1 sky box running through it and both are all power splitter boxes

\uap>

\uap>

\uap>

\uap>So you should have no problems setting them up

Reply to Discussion

RSS

Latest Activity

Richard Warlow posted a discussion

Panasonic DVR Recorders - Loading Problem

I was wondering when the loading problem is going to be fixed on the Panasonic DVR Recorders?There…See More
17 hours ago
Cliff Baker replied to Cait's discussion Freeview on demand no longer working
"Also on the Network status page "
22 hours ago
Cliff Baker replied to Cait's discussion Freeview on demand no longer working
"Same problem with my 2015 Sony Android tv. From geekzone there is a problem with the On Demand app…"
23 hours ago
Biggles replied to Kane's discussion No TV1 TV2 Duke or Prime
"Try Manual Tune on the appropriate MUX and check signal strength. Most likely an antenna/cabling…"
23 hours ago

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service