The EPG ex Mt Cargill is incorrect. It shows channels like Panda TV (only available in Auckland) but not Ch 39 the local channel. 

Greg

Views: 166

Reply to This

Replies to This Discussion

getting panda tv epg in hawkes bay but no pix
ch 33 all ok

Try a retune and see how this goes. 

Josh

I did a re-scan at 9.30 pm Thursday. The EPG still shows Ch 37 Panda TV which does not play here. Ch 39 the local Dunedin channel does not appear on the EPG. 

Greg

Ch 39 Dunedin's local channel was off-air for some time. The local newspaper said that the transmitter was unable to send a signal to some TV brands including Sony, Samsung and Panasonic. Technicians worked on the transmitter and it now broadcasts to those TVs again. I wonder if the Panda TV instead of Ch 39 EPG fault is a legacy of that break in transmission ? (I have a Sony TV.)

Greg

Hi Greg, are you able to confirm if you are watching on an approved device? Like a Freeview Approved Set Top Box or TV?

Josh

I am watching on a Sony TV model:KDL 32W600A LED - purchased 25 Nov 2009

Greg

Have you updated the firmware of the TV? 

Drivers and Software updates for KDL-32W600A | Sony NZ

Compare against the current firmware and follow SONY's instructions on how to load it into your TV. Seeing as you might have older software which may not update network settings. 

Let me know how you go

Josh

No, I will not be updating the firmware. I can live with the EPG displaying Panda TV and not the local channel. I feel sorry for viewers trying to find Ch 39 without the help of the EPG though. 

Greg

 

Reply to Discussion

RSS

NETWORK STATUS ALERTS

ALL PLATFORMS WORKING WELL, except a glitch with UHF transmission in Hawkes Bay affecting some JVC and VEON TVs.  See Network Status for more info and updates.

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2021   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service