Anyone got any ideas on this one:We lose Prime / Choice TV Reception reasonably regularly. Just No Signal on the channel but we can view all other channels fine. To get it back I go into the Comms…Continue
"Wow. Bit of a rat's nest! If you had a masthead amp there would be a power plugpack somewhere feeding power for it up the co-ax. What you have at the top is more likely a diplexer connecting the VHF and UHF antennae together. Ideally you need…"
"Assumed I had a masthead amp, as per the pic...
I took the UHF/VHF Aerial cable and connected it directly the the 4-way splitter and got no Signal at all. I took the VHF/UHF & Sky Dish combiner out and connected the VHF/UHF cable directly…"
So this morning it was back in the same state. I have taken a whole bunch of pictures of lots of channels when it was in the error / loss of signal state & then again after powercycling the Amp."
Thanks for getting in touch, has there been any environmental events around your area that may cause interference? Other members on this forum may help better with the amp side of things too.
Anyone got any ideas on this one:We lose Prime / Choice TV Reception reasonably regularly. Just No Signal on the channel but we can view all other channels fine. To get it back I go into the Comms Cupboard and power cycle the ALCAD AI-100 Amp and it normally comes back... Any ideas what might be happening should I replace the ALCAD AI-100? or like me does it seem odd that Prime is the only thing I lose. Signal Strength is always around 90 on all channels when it's working and same when…See More