ULTRAPLUS 900HD - freeview forum2024-03-29T05:44:55Zhttps://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A61363&feed=yes&xn_auth=noNot sure , but if you first s…tag:freeviewforum.co.nz,2016-06-22:6513406:Comment:628992016-06-22T05:03:29.320ZRobert Hepplehttps://freeviewforum.co.nz/profile/RobertHepple
<p>Not sure , but if you first save your current channel lineup to a USB stick (from memory under USB transfer in the menu ), you can always revert back if it doesn't , I will be keen to know as I don't have a 920 here - cheers Robert <br></br> <br></br> <cite>Makaela Wilson said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A62995&xg_source=msg_com_forum#6513406Comment62995"><div><div class="xg_user_generated"><p>Would this work…</p>
</div>
</div>
</blockquote>
<p>Not sure , but if you first save your current channel lineup to a USB stick (from memory under USB transfer in the menu ), you can always revert back if it doesn't , I will be keen to know as I don't have a 920 here - cheers Robert <br/> <br/> <cite>Makaela Wilson said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A62995&xg_source=msg_com_forum#6513406Comment62995"><div><div class="xg_user_generated"><p>Would this work for UltraPlus 920 as well?<br/> <br/> <cite>B Welch said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd#6513406Comment61510"><div><div class="xg_user_generated"><p><br/> <br/> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br/> Navigate to Service Search in the Installation Menu<br/> Change the Search Mode to Manual =yes<br/> Make sure the OPTUS D1 Satellite is selected =yes<br/> Set the frequency to 12519MHz =yes < was 12456 MHz<br/> Make sure the Symbol rate is 22500 =yes<br/> Make sure the Polarity is Horizontal =yes<br/> Change the Search Type to FTA Only =yes<br/> Change the Network Search to Off =yes<br/> Start the Search < clicked OK =got: </p>
<p>3 TV Stations found<br/>5 Radio Services found<br/>- 3 New TV Services<br/>- 0 New Radio Services<br/>Do you want to copy scanned services to another tuner?</p>
<p>The options for this question were "OK" and "Cancel" < I chose OK =got: Service Error.</p>
<p><br/>Turned the PVR off using the remote. Turned on again, went to the previous channel that got Prime, (#111), got "Prime has moved"</p>
<p>Joined Freeviewforum. While waiting my pending membership, did the above again:</p>
<p>found frequency set on 12707 MHz !! < !!<br/>got 0 New TV Services (last time got 3) <br/>This time chose the option "Cancel"<br/>Level=92% Quality=85% <br/>Clicked "Exit" button, again got channel #74, went to #111 got the same "Prime has moved" (But the UltraPlus info bar said Animal Airport - which Listener said was currently on)</p>
<p>Started at TV1, clicked through everything to about #120, didn't find a working Prime.</p>
<p>I don't actually know what channel it might be. :)</p>
<p>So I'm stuck.</p>
<p>Any help much appreciated. Thanks.</p>
<p></p>
<p></p>
</div>
</blockquote>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote> Would this work for UltraPlus…tag:freeviewforum.co.nz,2016-06-22:6513406:Comment:629952016-06-22T04:59:39.071ZMakaela Wilsonhttps://freeviewforum.co.nz/profile/MakaelaWilson
<p>Would this work for UltraPlus 920 as well?<br></br> <br></br> <cite>B Welch said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd#6513406Comment61510"><div><div class="xg_user_generated"><p><br></br> <br></br> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD…</p>
</div>
</blockquote>
</div>
</div>
</blockquote>
<p>Would this work for UltraPlus 920 as well?<br/> <br/> <cite>B Welch said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd#6513406Comment61510"><div><div class="xg_user_generated"><p><br/> <br/> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br/> Navigate to Service Search in the Installation Menu<br/> Change the Search Mode to Manual =yes<br/> Make sure the OPTUS D1 Satellite is selected =yes<br/> Set the frequency to 12519MHz =yes < was 12456 MHz<br/> Make sure the Symbol rate is 22500 =yes<br/> Make sure the Polarity is Horizontal =yes<br/> Change the Search Type to FTA Only =yes<br/> Change the Network Search to Off =yes<br/> Start the Search < clicked OK =got: </p>
<p>3 TV Stations found<br/>5 Radio Services found<br/>- 3 New TV Services<br/>- 0 New Radio Services<br/>Do you want to copy scanned services to another tuner?</p>
<p>The options for this question were "OK" and "Cancel" < I chose OK =got: Service Error.</p>
<p><br/>Turned the PVR off using the remote. Turned on again, went to the previous channel that got Prime, (#111), got "Prime has moved"</p>
<p>Joined Freeviewforum. While waiting my pending membership, did the above again:</p>
<p>found frequency set on 12707 MHz !! < !!<br/>got 0 New TV Services (last time got 3) <br/>This time chose the option "Cancel"<br/>Level=92% Quality=85% <br/>Clicked "Exit" button, again got channel #74, went to #111 got the same "Prime has moved" (But the UltraPlus info bar said Animal Airport - which Listener said was currently on)</p>
<p>Started at TV1, clicked through everything to about #120, didn't find a working Prime.</p>
<p>I don't actually know what channel it might be. :)</p>
<p>So I'm stuck.</p>
<p>Any help much appreciated. Thanks.</p>
<p></p>
<p></p>
</div>
</blockquote>
</div>
</div>
</blockquote> Click on this link, download…tag:freeviewforum.co.nz,2016-06-21:6513406:Comment:631612016-06-21T08:46:09.790ZRobert Hepplehttps://freeviewforum.co.nz/profile/RobertHepple
<p>Click on this link, download this file to a USB stick and put it into the USB socket on the front of the 900 , it will update the channel list (press the red button when asked to)</p>
<p><a rel="nofollow" href="http://www.westronics.co.nz/900.fdu" target="_blank">http://www.westronics.co.nz/900.fdu</a></p>
<p>Has the new channel plan for the Ultraplus 900</p>
<p>Click on this link, download this file to a USB stick and put it into the USB socket on the front of the 900 , it will update the channel list (press the red button when asked to)</p>
<p><a rel="nofollow" href="http://www.westronics.co.nz/900.fdu" target="_blank">http://www.westronics.co.nz/900.fdu</a></p>
<p>Has the new channel plan for the Ultraplus 900</p> B Welch said: Found PRIME o…tag:freeviewforum.co.nz,2016-06-14:6513406:Comment:614632016-06-14T19:49:57.811ZB Welchhttps://freeviewforum.co.nz/profile/BWelch
<p><br></br> <br></br> <cite>B Welch said: Found PRIME on #136 Will do some removals and move Prime to a better number.</cite></p>
<p>Thanks Paul and Bruce</p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd#6513406Comment61510"><div><div class="xg_user_generated"><p><br></br> <br></br> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below…</p>
</div>
</blockquote>
</div>
</div>
</blockquote>
<p><br/> <br/> <cite>B Welch said: Found PRIME on #136 Will do some removals and move Prime to a better number.</cite></p>
<p>Thanks Paul and Bruce</p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd#6513406Comment61510"><div><div class="xg_user_generated"><p><br/> <br/> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br/> Navigate to Service Search in the Installation Menu<br/> Change the Search Mode to Manual =yes<br/> Make sure the OPTUS D1 Satellite is selected =yes<br/> Set the frequency to 12519MHz =yes < was 12456 MHz<br/> Make sure the Symbol rate is 22500 =yes<br/> Make sure the Polarity is Horizontal =yes<br/> Change the Search Type to FTA Only =yes<br/> Change the Network Search to Off =yes<br/> Start the Search < clicked OK =got: </p>
<p>3 TV Stations found<br/>5 Radio Services found<br/>- 3 New TV Services<br/>- 0 New Radio Services<br/>Do you want to copy scanned services to another tuner?</p>
<p>The options for this question were "OK" and "Cancel" < I chose OK =got: Service Error.</p>
<p><br/>Turned the PVR off using the remote. Turned on again, went to the previous channel that got Prime, (#111), got "Prime has moved"</p>
<p>Joined Freeviewforum. While waiting my pending membership, did the above again:</p>
<p>found frequency set on 12707 MHz !! < !!<br/>got 0 New TV Services (last time got 3) <br/>This time chose the option "Cancel"<br/>Level=92% Quality=85% <br/>Clicked "Exit" button, again got channel #74, went to #111 got the same "Prime has moved" (But the UltraPlus info bar said Animal Airport - which Listener said was currently on)</p>
<p>Started at TV1, clicked through everything to about #120, didn't find a working Prime.</p>
<p>I don't actually know what channel it might be. :)</p>
<p>So I'm stuck.</p>
<p>Any help much appreciated. Thanks.</p>
<p></p>
<p></p>
</div>
</blockquote>
</div>
</div>
</blockquote> THANK YOU BRUCE, WE WONDERED…tag:freeviewforum.co.nz,2016-06-14:6513406:Comment:613662016-06-14T10:36:09.962ZDENISE MCKNIGHThttps://freeviewforum.co.nz/profile/DENISEMCKNIGHT
<p>THANK YOU BRUCE, WE WONDERED HOW TO GET RID OF ALL THE UNUSED CHANNELS. WILL LOOK AT DOING THIS IN THEBNEXT DAY OR SO.<br></br> <br></br> <cite>Bruce Barnett said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A61510&xg_source=msg_com_forum#6513406Comment61162"><div><div class="xg_user_generated"><p>to delete unwanted channels and double ups</p>
<p>push menu</p>
<p>sideways to service list manager select delete.</p>
<p>scroll to…</p>
</div>
</div>
</blockquote>
<p>THANK YOU BRUCE, WE WONDERED HOW TO GET RID OF ALL THE UNUSED CHANNELS. WILL LOOK AT DOING THIS IN THEBNEXT DAY OR SO.<br/> <br/> <cite>Bruce Barnett said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A61510&xg_source=msg_com_forum#6513406Comment61162"><div><div class="xg_user_generated"><p>to delete unwanted channels and double ups</p>
<p>push menu</p>
<p>sideways to service list manager select delete.</p>
<p>scroll to unwanted channels and ok them they will move to right side</p>
<p>when finished selction PUSH GREEN BUTTON TO REMOVE.</p>
<p></p>
</div>
</div>
</blockquote> THANK YOU PAUL, WE DID THIS A…tag:freeviewforum.co.nz,2016-06-14:6513406:Comment:613632016-06-14T10:34:35.733ZDENISE MCKNIGHThttps://freeviewforum.co.nz/profile/DENISEMCKNIGHT
<p>THANK YOU PAUL, WE DID THIS AND HAVE PRIME, EVEN THOUGH IT'S CHANNEL 173 WE CAN VIEW IT!<br></br> <br></br> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A61510&xg_source=msg_com_forum#6513406Comment61052"><div><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the…</p>
</div>
</div>
</blockquote>
<p>THANK YOU PAUL, WE DID THIS AND HAVE PRIME, EVEN THOUGH IT'S CHANNEL 173 WE CAN VIEW IT!<br/> <br/> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?commentId=6513406%3AComment%3A61510&xg_source=msg_com_forum#6513406Comment61052"><div><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br/> Navigate to Service Search in the Installation Menu<br/> Change the Search Mode to Manual<br/> Make sure the OPTUS D1 Satellite is selected<br/> Set the frequency to 12519MHz<br/> Make sure the Symbol rate is 22500<br/> Make sure the Polarity is Horizontal<br/> Change the Search Type to FTA Only<br/> Change the Network Search to Off<br/> Start the Search</p>
</div>
</div>
</blockquote> Paul said:
The instructions…tag:freeviewforum.co.nz,2016-06-14:6513406:Comment:615102016-06-14T09:41:04.922ZB Welchhttps://freeviewforum.co.nz/profile/BWelch
<p><br></br> <br></br> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br></br> Navigate to Service Search in the Installation Menu<br></br> Change the Search Mode to Manual =yes…<br></br></p>
</div>
</blockquote>
<p><br/> <br/> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/ultraplus-900hd?xg_source=activity#6513406Comment61052"><div class="xg_user_generated"><p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br/> Navigate to Service Search in the Installation Menu<br/> Change the Search Mode to Manual =yes<br/> Make sure the OPTUS D1 Satellite is selected =yes<br/> Set the frequency to 12519MHz =yes <<< was 12456 MHz<br/> Make sure the Symbol rate is 22500 =yes<br/> Make sure the Polarity is Horizontal =yes<br/> Change the Search Type to FTA Only =yes<br/> Change the Network Search to Off =yes<br/> Start the Search <<< clicked OK =got: </p>
<p>3 TV Stations found<br/>5 Radio Services found<br/>- 3 New TV Services<br/>- 0 New Radio Services<br/>Do you want to copy scanned services to another tuner?</p>
<p>The options for this question were "OK" and "Cancel" < I chose OK =got: Service Error.</p>
<p><br/>Turned the PVR off using the remote. Turned on again, went to the previous channel that got Prime, (#111), got "Prime has moved"</p>
<p>Joined Freeviewforum. While waiting my pending membership, did the above again:</p>
<p>found frequency set on 12707 MHz !! < !!<br/>got 0 New TV Services (last time got 3) <br/>This time chose the option "Cancel"<br/>Level=92% Quality=85% <br/>Clicked "Exit" button, again got channel #74, went to #111 got the same "Prime has moved" (But the UltraPlus info bar said Animal Airport - which Listener said was currently on)</p>
<p>Started at TV1, clicked through everything to about #120, didn't find a working Prime.</p>
<p>I don't actually know what channel it might be. :)</p>
<p>So I'm stuck.</p>
<p>Any help much appreciated. Thanks.</p>
<p></p>
<p></p>
</div>
</blockquote> to delete unwanted channels a…tag:freeviewforum.co.nz,2016-06-14:6513406:Comment:611622016-06-14T01:47:24.324ZBruce Barnetthttps://freeviewforum.co.nz/profile/BruceBarnett
<p>to delete unwanted channels and double ups</p>
<p>push menu</p>
<p>sideways to service list manager select delete.</p>
<p>scroll to unwanted channels and ok them they will move to right side</p>
<p>when finished selction PUSH GREEN BUTTON TO REMOVE.</p>
<p></p>
<p>to delete unwanted channels and double ups</p>
<p>push menu</p>
<p>sideways to service list manager select delete.</p>
<p>scroll to unwanted channels and ok them they will move to right side</p>
<p>when finished selction PUSH GREEN BUTTON TO REMOVE.</p>
<p></p> The instructions below should…tag:freeviewforum.co.nz,2016-06-14:6513406:Comment:610522016-06-14T01:24:03.360ZPaulhttps://freeviewforum.co.nz/profile/Paul771
<p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br></br> Navigate to Service Search in the Installation Menu<br></br> Change the Search Mode to Manual<br></br> Make sure the OPTUS D1 Satellite is selected<br></br> Set the frequency to 12519MHz<br></br> Make sure the Symbol rate is 22500<br></br> Make sure the Polarity is Horizontal<br></br> Change the Search Type to…</p>
<p>The instructions below should work for your ULTRAPLUS 900HD micro PVR FULL HD 1080p.</p>
<p></p>
<p>To scan in Prime at 12519MHz on an UltraPlus 680P just follow the following steps:</p>
<p>Press Menu<br/> Navigate to Service Search in the Installation Menu<br/> Change the Search Mode to Manual<br/> Make sure the OPTUS D1 Satellite is selected<br/> Set the frequency to 12519MHz<br/> Make sure the Symbol rate is 22500<br/> Make sure the Polarity is Horizontal<br/> Change the Search Type to FTA Only<br/> Change the Network Search to Off<br/> Start the Search</p>