The recommended dish elevation for my location is 44.4Deg. Trying this I get no signal. Looking at most dishes in the area they all appear to be at an elevation of around 23deg???? and they work.

So I tried this and it works. So why is the recommendation for around 45deg

Cheers

Views: 135

Reply to This

Replies to This Discussion

Where on earth are you measuring from? The elevation markings should be written on the side. 

Elevation is the angle of the horizon that the satellite sits at. The dish is normally offset .

Because the dishes have the LNB offset and not at the central focal point. That's why they seem to be at quite a different angle. Think of the Dish as a mirror.  If the dish is at around 15 degrees then the LNB will be looking at around 45 degrees. If the LNB was at the Central point then the dish would be at 44.4deg.

All dishes I've seen have the calibration marks on the side of the mount and are appropriate to the offset of the LNB.

An offset dish will be offset by about 22deg to stop the lnb partially blocking the signal

Thanks ...  sort of makes sense. The markings on the mount also show it's not 44deg

Reply to Discussion

RSS

Latest Activity

Russell Clarke posted a discussion

Samsung 55" Ultra HD 4K Smart LED Television

Freeview on demand app on my Smart TV (<1 year old) is really buggy.  You browse programmes etc…See More
yesterday
Biggles replied to Phillip Chatfield's discussion AV Sync with Set Top Box via AV Reciever and ARC Channel
"No. TV will be fine. Same age as my Sony which is still going well. The only thing that's…"
yesterday
Phillip Chatfield replied to Phillip Chatfield's discussion AV Sync with Set Top Box via AV Reciever and ARC Channel
"Hi Biggles, Thanks for the response, yeah the TV I have does have it built in correct, However, due…"
yesterday
Biggles replied to Phillip Chatfield's discussion AV Sync with Set Top Box via AV Reciever and ARC Channel
"I doubt that doing another auto tune will fix the issue. You could try running the STB HDMI direct…"
yesterday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service