Satellite; Can't get 1, 2, Maori, 1+1, or 2+1; Prime reception poor; Do I need to re-align my dish? - freeview forum2024-03-29T10:45:47Zhttps://freeviewforum.co.nz/forum/topics/satellite-can-t-get-1-2-maori-1-1-or-2-1-prime-reception-poor-do?feed=yes&xn_auth=noBest you purchase a brand new…tag:freeviewforum.co.nz,2014-01-06:6513406:Comment:329632014-01-06T09:51:12.039Znzdtv.comhttps://freeviewforum.co.nz/profile/nzdtvcom
<p>Best you purchase a brand new LNBF before your existing one fails completely</p>
<p> </p>
<p>Best you purchase a brand new LNBF before your existing one fails completely</p>
<p> </p> Also have a look at this link…tag:freeviewforum.co.nz,2014-01-06:6513406:Comment:331332014-01-06T09:00:10.290ZGraham Wilsonhttps://freeviewforum.co.nz/profile/GrahamWilson
<p>Also have a look at this link:</p>
<p><a href="https://www.dropbox.com/sh/99ijdy2d5vkvke5/3ST1g7o4wi/ZMX-7500%20TV1%20%26%20TV2%20Missing.pdf">https://www.dropbox.com/sh/99ijdy2d5vkvke5/3ST1g7o4wi/ZMX-7500%20TV1%20%26%20TV2%20Missing.pdf</a></p>
<p>Although the above is written for the ZMX-7500, most of the instructions are applicable to any Freeview satellite installation</p>
<p>Also have a look at this link:</p>
<p><a href="https://www.dropbox.com/sh/99ijdy2d5vkvke5/3ST1g7o4wi/ZMX-7500%20TV1%20%26%20TV2%20Missing.pdf">https://www.dropbox.com/sh/99ijdy2d5vkvke5/3ST1g7o4wi/ZMX-7500%20TV1%20%26%20TV2%20Missing.pdf</a></p>
<p>Although the above is written for the ZMX-7500, most of the instructions are applicable to any Freeview satellite installation</p> Thanks Paul,
I climbed on to…tag:freeviewforum.co.nz,2013-12-23:6513406:Comment:327202013-12-23T20:51:07.939ZGlen Richardshttps://freeviewforum.co.nz/profile/GlenRichards
<p>Thanks Paul,</p>
<p>I climbed on to my roof and determined that I have a 'Sharp' Sky Single LNB - 11300 L.O. satellite dish.</p>
<p>So in the DVB-S Setup screen (attached) I tried adjusting the 'LOF' 5 ticks at a time above and below 11300. Doing this has allowed me to find my missing channels, although I get stutter with them. I'll keep adjusting till I get the best reception. I've nearly got Prime perfect.</p>
<p>Thanks for the advice.</p>
<p></p>
<p>Cheers, Glen</p>
<p>Thanks Paul,</p>
<p>I climbed on to my roof and determined that I have a 'Sharp' Sky Single LNB - 11300 L.O. satellite dish.</p>
<p>So in the DVB-S Setup screen (attached) I tried adjusting the 'LOF' 5 ticks at a time above and below 11300. Doing this has allowed me to find my missing channels, although I get stutter with them. I'll keep adjusting till I get the best reception. I've nearly got Prime perfect.</p>
<p>Thanks for the advice.</p>
<p></p>
<p>Cheers, Glen</p> If you are worried about muck…tag:freeviewforum.co.nz,2013-12-23:6513406:Comment:326602013-12-23T11:26:44.006ZPaulhttps://freeviewforum.co.nz/profile/Paul771
<p>If you are worried about mucking up your satellite dishes current position mark its present position before with a vivid permanent marker before making any adjustments.</p>
<p>Its more likely that your LNB has started to drift.</p>
<p>I would try changing your LNB frequency to <strong>10745</strong> from 10750.</p>
<p>LNB drift explained <a rel="nofollow" href="http://www.legiontv.co.nz/archives/122" target="_blank">here</a></p>
<p>If you are worried about mucking up your satellite dishes current position mark its present position before with a vivid permanent marker before making any adjustments.</p>
<p>Its more likely that your LNB has started to drift.</p>
<p>I would try changing your LNB frequency to <strong>10745</strong> from 10750.</p>
<p>LNB drift explained <a rel="nofollow" href="http://www.legiontv.co.nz/archives/122" target="_blank">here</a></p>