Kaon DV3 Digital Satellite Receiver Model KSF-270 -Tune for TV3 - freeview forum2024-03-29T12:27:12Zhttps://freeviewforum.co.nz/forum/topics/kaon-dv3-digital-satellite-receiver-model-ksf-270-tune-for-tv3?feed=yes&xn_auth=noHi Anil
Thanks very much for…tag:freeviewforum.co.nz,2016-07-10:6513406:Comment:646112016-07-10T00:59:45.746ZChristine Staitehttps://freeviewforum.co.nz/profile/ChristineStaite
<p>Hi Anil</p>
<p>Thanks very much for information and instructions for a factory reset, much appreciated. Will print them off and keep them in case I need them. Had already reinstalled channels using Paul's instructions but haven't been near my laptop for a few days to reply and say that the instructions he gave worked fine.</p>
<p>Regards</p>
<p>Christine</p>
<p><br></br> <cite>Anil Hari said:…</cite></p>
<p>Hi Anil</p>
<p>Thanks very much for information and instructions for a factory reset, much appreciated. Will print them off and keep them in case I need them. Had already reinstalled channels using Paul's instructions but haven't been near my laptop for a few days to reply and say that the instructions he gave worked fine.</p>
<p>Regards</p>
<p>Christine</p>
<p><br/> <cite>Anil Hari said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/kaon-dv3-digital-satellite-receiver-model-ksf-270-tune-for-tv3?commentId=6513406%3AComment%3A64060&xg_source=activity#6513406Comment64196"><div><div class="xg_user_generated"><p>The KSF-270 has "Automatic Freeview Install". You can reinstall the channels via a factory reset and then retune.</p>
<p>1. Press Menu<br/>2. Select System Settings press OK<br/>3. Enter PIN if requested. Default PIN is 0000<br/>4. Move down to Factory Reset<br/>5. Press OK to confirm Factory Reset. The receiver will restart and show the Easy Setup Menu<br/>6. Select Menu Language and press OK<br/>7. Select Audio Language and press OK<br/>8. Select Subtitle Language and press OK<br/>9. Set the Time to GMT+12:00 and press OK ( we are currently GMT+12:00 and during daylight savings GMT+13:00 )<br/>10. Select the closes location from the list and press OK<br/>11. Select "Automatic Freeview Installation"<br/>12. Once the search is complete the number TV and Radio channels found will be shown. Press OK to continue.<br/>13. Press OK to exit<br/>14. Press OK to Save the channels found<br/>15. Press Exit to exit the Menu<br/>16. Check if you have all the channels.</p>
</div>
</div>
</blockquote> Hi Paul
Thanks very much for…tag:freeviewforum.co.nz,2016-07-10:6513406:Comment:646082016-07-10T00:53:45.496ZChristine Staitehttps://freeviewforum.co.nz/profile/ChristineStaite
<p><br></br> Hi Paul</p>
<p>Thanks very much for instructions. Followed them and now have all my channels back. Thanks for helping, much appreciated.</p>
<p>Regards</p>
<p>Christine</p>
<p><br></br> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/kaon-dv3-digital-satellite-receiver-model-ksf-270-tune-for-tv3?commentId=6513406%3AComment%3A64060&xg_source=activity#6513406Comment64060"><div><div class="xg_user_generated"><p><strong>Try the below , please let us…</strong></p>
</div>
</div>
</blockquote>
<p><br/> Hi Paul</p>
<p>Thanks very much for instructions. Followed them and now have all my channels back. Thanks for helping, much appreciated.</p>
<p>Regards</p>
<p>Christine</p>
<p><br/> <cite>Paul said:</cite></p>
<blockquote cite="http://freeviewforum.co.nz/forum/topics/kaon-dv3-digital-satellite-receiver-model-ksf-270-tune-for-tv3?commentId=6513406%3AComment%3A64060&xg_source=activity#6513406Comment64060"><div><div class="xg_user_generated"><p><strong>Try the below , please let us know if this works :)</strong></p>
<p>You can use the following method to re-scan channels on the KSF-270 if you have lost some channels:<br/><br/>1. Press Menu<br/>2. Select Installation press OK<br/>3. Enter PIN if requested. Default PIN is 0000<br/>4. Move to "Optus D1" satellite and ensure "Optus D1" is highlighted in blue.<br/>5. Press the Green button on the remote control to list the transponders.<br/>6. Move to transponder labelled, "12456 22500 .." and ensure it is highlighted in blue.<br/>7. Press the OK button to select the transponder. When selected, a "tick" will appear next to it.<br/>8. Press the Red button on the remote control to show the scan popup menu.<br/>9. Change "Network" to "on". Use the left and right arrow buttons to change the settings.<br/>10. Press the OK button to scan. Allow the scan to finish.<br/>11. Once the scan is finished, the number of new TV and Radio channels found will be shown.<br/>12. Press OK to exit<br/>13. Press OK to Save the channels found<br/>14. Press Exit to exit the Menu<br/>15. Check if you have all the channels.</p>
</div>
</div>
</blockquote> The KSF-270 has "Automatic Fr…tag:freeviewforum.co.nz,2016-07-08:6513406:Comment:641962016-07-08T10:15:38.628ZAnil Harihttps://freeviewforum.co.nz/profile/AnilHari
<p>The KSF-270 has "Automatic Freeview Install". You can reinstall the channels via a factory reset and then retune.</p>
<p>1. Press Menu<br></br>2. Select System Settings press OK<br></br>3. Enter PIN if requested. Default PIN is 0000<br></br>4. Move down to Factory Reset<br></br>5. Press OK to confirm Factory Reset. The receiver will restart and show the Easy Setup Menu<br></br>6. Select Menu Language and press OK<br></br>7. Select Audio Language and press OK<br></br>8. Select Subtitle Language and press OK<br></br>9. Set…</p>
<p>The KSF-270 has "Automatic Freeview Install". You can reinstall the channels via a factory reset and then retune.</p>
<p>1. Press Menu<br/>2. Select System Settings press OK<br/>3. Enter PIN if requested. Default PIN is 0000<br/>4. Move down to Factory Reset<br/>5. Press OK to confirm Factory Reset. The receiver will restart and show the Easy Setup Menu<br/>6. Select Menu Language and press OK<br/>7. Select Audio Language and press OK<br/>8. Select Subtitle Language and press OK<br/>9. Set the Time to GMT+12:00 and press OK ( we are currently GMT+12:00 and during daylight savings GMT+13:00 )<br/>10. Select the closes location from the list and press OK<br/>11. Select "Automatic Freeview Installation"<br/>12. Once the search is complete the number TV and Radio channels found will be shown. Press OK to continue.<br/>13. Press OK to exit<br/>14. Press OK to Save the channels found<br/>15. Press Exit to exit the Menu<br/>16. Check if you have all the channels.</p> Try the below , please let us…tag:freeviewforum.co.nz,2016-07-06:6513406:Comment:640602016-07-06T11:49:21.231ZPaulhttps://freeviewforum.co.nz/profile/Paul771
<p><strong>Try the below , please let us know if this works :)</strong></p>
<p>You can use the following method to re-scan channels on the KSF-270 if you have lost some channels:<br></br><br></br>1. Press Menu<br></br>2. Select Installation press OK<br></br>3. Enter PIN if requested. Default PIN is 0000<br></br>4. Move to "Optus D1" satellite and ensure "Optus D1" is highlighted in blue.<br></br>5. Press the Green button on the remote control to list the transponders.<br></br>6. Move to transponder labelled, "12456 22500…</p>
<p><strong>Try the below , please let us know if this works :)</strong></p>
<p>You can use the following method to re-scan channels on the KSF-270 if you have lost some channels:<br/><br/>1. Press Menu<br/>2. Select Installation press OK<br/>3. Enter PIN if requested. Default PIN is 0000<br/>4. Move to "Optus D1" satellite and ensure "Optus D1" is highlighted in blue.<br/>5. Press the Green button on the remote control to list the transponders.<br/>6. Move to transponder labelled, "12456 22500 .." and ensure it is highlighted in blue.<br/>7. Press the OK button to select the transponder. When selected, a "tick" will appear next to it.<br/>8. Press the Red button on the remote control to show the scan popup menu.<br/>9. Change "Network" to "on". Use the left and right arrow buttons to change the settings.<br/>10. Press the OK button to scan. Allow the scan to finish.<br/>11. Once the scan is finished, the number of new TV and Radio channels found will be shown.<br/>12. Press OK to exit<br/>13. Press OK to Save the channels found<br/>14. Press Exit to exit the Menu<br/>15. Check if you have all the channels.</p>