We currently have a satelite dish (supplied by Sky). Although we are in Auckland, where we live is in a UHF black spot.  There are 3 cables connected to the LNB on the dish.  2 of these go to sky boxes in different living areas and one to a freeview box in a sleep-out.  I want to install another freeview box in a bedroom.  

I don't have suitable equipment to safely climb up to the dish, so i was wondering if it is possible to split one of the 3 existing cables 2 ways, with a 2 way splitter under the house, and leave the other two cables as they are.

I've attached a photo of the LNB taken from the ground to show the configuration with the 3 cables.

Views: 178

Attachments:

Reply to This

Replies to This Discussion

Yes

I have downloaded 2 images of the way mine are set up . The 1st shows 2 LNB going in and 2 going to 2 different floors the top goes to 4 freeview & 1 sky box and the bottom goes to a single freeview box , and the 2nd image is the splitter that has the 4 freeview and 1 sky box running through it and both are all power splitter boxes

\uap>

\uap>

\uap>

\uap>So you should have no problems setting them up

Reply to Discussion

RSS

Latest Activity

Josh ✔️ replied to James Eaton's discussion Freeview Reception Waikanae
"Thanks for getting in touch, we were notified Sunday night by the transmission provider Kordia of a…"
Sunday
Gavin Barbour replied to James Eaton's discussion Freeview Reception Waikanae
"Same in Christchurch - must be a national problem,"
Sunday
Jase Betts replied to James Eaton's discussion Freeview Reception Waikanae
"I had it in Christchurch but it was the TVNZ satellite transponder only, now fixed. stations on the…"
Sunday
Alan Douglas replied to Alan Douglas's discussion Recording The AM Show on TV3
"Thanks Josh, It is a DishTV S7090PVR. I am having no problems with other shows like the TVNZ…"
Sunday

Connect With Us!

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service