Set top box: Dish TV satBox S7070r
Shows error "no reception, check cables or satellite". Tuning wizard finds no channels or reception, have unplugged and reset everything multiple times.

Any help on how to get this to work would be greatly appreciated. Also if anyone knows decent technicians in the Cambridge/ Te Awamutu area that would be a bonus

Views: 317

Reply to This

Replies to This Discussion

Also, upstairsour sky (through the same satellite) is working fine
set the lnb setting to either 11300 or 10750 as one should work
if still nothing new box time
Thanks for the reply willis, I have tried setting the LNB to 11300 and 10750 and neither work. I have also tried the set top box at another house, and it works fine, tunes automatically and very quickly. I rang Dish TV and they said the LNB part may have degraded, and when it does degrade, Freeview stops working before SKY because SKY operates on a larger band (which would explain why the sky works upstairs). Does this sound right? Thanks.
both freeview and sky have the same transponder bandwidth

Hey Guys!

Sorry, bit of a late reply....

Is it just me or did you say that it stopped working after a storm?
Maybe your dish has shifted slightly. Some channels are slightly stronger than others so might just come above the threshold.

If I were you I'd make sure your box is set to a proper channel (using someone else's dish), connect it to your dish and put a TV so you can see it from where the dish is. Then push the 'arm' on which the LNB is mounted a little bit right, left, up, down and see what happens. If you get results, carefully turn the dish in the opposite direction (I know, sounds weird but try) and optimise the position.

Let us know how it goes, good luck!

Bart

Reply to Discussion

RSS

Connect With Us!

Be a part of the New Zealand Freeview Community!

Welcome to your Freeview Forum!  This is the online home for all Freeview viewers, retailers, manufacturers and installers. It's a place where you can find help, share advice, tips and your know-how to help another fellow "Freeviewer" out.

How do I get started?

1. Begin by signing up for Freeview Forum here.  Sign up is simple, fast & free, all we ask is that you abide by a few simple guidelines.

2. Once you've signed up, you'll be able to:

What details should be included when asking for help?

Including key details will help the community help you.....

1. What your coverage is (check by entering your full address here).

2. What antenna you're using (indoor of outdoor UHF aerial, or satellite dish).

3. What brand & model your device is.

4. What channels or programmes you're having trouble with (if any).

5. And of course - as many other details as you think would be relevant.

© 2019   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service