My Freeview has tv 1+1 on channel 14, and channel 6 which should be 1+1 has the games logo which states that the games extra channel has finished. The problem I have is that if I record channel 1+1 it records the screen about the games finishing. Is there a way to swap the channels? Is anyone else having this problem? Thanks in advance.

Views: 170

Reply to This

Replies to This Discussion

Hi Robyn, 

That's not normal, what kind of Freeview Box / TV do you have?
A re-scan may correct the issue, let us know how you get on.

Kind Regards,

Josh

Hi josh,

I have got an aerial box ultra, t1050pvr, my Freeview.

have tried rescanning, saves channels back in same places.

have turned power in and off,etc.

Any other suggestions, I was able to move channels on another cheaper tv, but don't seem to be able to on this system,

thank you,

robyn.

It might be best to contact DISH TV who manufactures that box, you can read them via this website here: https://www.dishtv.co.nz/index.php?route=information/contact

Reply to Discussion

RSS

Latest Activity

Jon Walker posted a discussion

Sony KD55X8500E TV3 on demand part of freeview not updating.

We have Sony KD55X8500E with current Sony firmware and software all up to date. . About 6 days ago…See More
37 minutes ago
Glen N Monnie Stevens replied to Glen N Monnie Stevens's discussion No signal
"thanks for the help guys It turns out the LNB is the problem. but we managed to get it working for…"
Thursday
Biggles replied to Glen N Monnie Stevens's discussion No signal
"LNB Frequency drift due to heating during the day is the usual cause. Replace your LNB."
Wednesday
John Baird replied to Glen N Monnie Stevens's discussion No signal
"You probably have an ex sky dish, and you need to replace the LNB. The piece at the end, LO 10750"
Wednesday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service