I have purchased a Dish antenna which is proudly sitting on the roof, aligned approximately to the Optus D1 azimuth and elevation. I have a Pansonic TH-24A400Z TV purchased second hand and which is  waiting for collection. What I need to know from somebody, please, is whether I need a blackl box device to match the dish LNB into this particular TV or not. Nobody seems to be able to tell me. The LNB Output is 950Mhz to 1450 Mhz. Thanks in anticipation....

Views: 307

Reply to This

Replies to This Discussion

It doesn't have a sat tuner so you will need either a Sat Box between the Dish and the TV or UHF antenna direct to TV..

https://www.panasonic.com/nz/support/product-archives/product-archi...

Thanks, that is what I suspected. I feel silly having bought the TV on trademe only to find out that the TVs of this family are pretty well rubbished for picture quality by Consumer in its latest magazine review. When I receive it I will try it out and maybe write it off as a bad decision. Further to your comments, we have only satellite coverage here in the far north, so UHF cannot be used.

Reply to Discussion

RSS

Latest Activity

Graham Syder replied to Graham Syder's discussion is there UHF in Puponga?
"Excellent feedback guys, I'm off over there for the weekend. I don't have a mast to…"
15 hours ago
Satellite Networks Motueka replied to Graham Syder's discussion is there UHF in Puponga?
"Willis is right and you dont need a high gain antennae.The coverage map is so flawed. There is no…"
yesterday
Biggles replied to Graham Syder's discussion is there UHF in Puponga?
"Well it does according to it's coverage map. East side of Arapawa Is shows good reception…"
yesterday
willis replied to Graham Syder's discussion is there UHF in Puponga?
"signal probably Mt Campbell as kaukau doesn't go west"
yesterday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service