All Discussions Tagged 'no' - freeview forum2024-03-29T06:35:38Zhttps://freeviewforum.co.nz/forum/topic/listForTag?tag=no&feed=yes&xn_auth=notook satellite in cable from FV box put it in to new TV.. no signaltag:freeviewforum.co.nz,2020-05-06:6513406:Topic:989922020-05-06T04:27:01.265ZJohn Griffithshttps://freeviewforum.co.nz/profile/JohnGriffiths
<p>I bought a new Panasonic tv and wanted to dump the Freeview box, so I took out the "sat in" from box and put it into "sat in" on the tv.. no signal, tried all the tune in to satellite options.. correct satellite , any help as had to connect back to box,</p>
<p>(I used to install Panasonic TV for a profession and have just set up a 32" Panasonic so thought the new 50" would be a doddle...)</p>
<p>I bought a new Panasonic tv and wanted to dump the Freeview box, so I took out the "sat in" from box and put it into "sat in" on the tv.. no signal, tried all the tune in to satellite options.. correct satellite , any help as had to connect back to box,</p>
<p>(I used to install Panasonic TV for a profession and have just set up a 32" Panasonic so thought the new 50" would be a doddle...)</p> No satellite signaltag:freeviewforum.co.nz,2019-07-30:6513406:Topic:918882019-07-30T01:26:02.478ZReneehttps://freeviewforum.co.nz/profile/Renee60
<p>We moved into a new house this week and can't get Freeview to work at all (or Sky for that matter). We are just getting a "no signal" message no matter what we do. We can't get UHF reception in Blenheim, so this is via satellite. Any ideas? I'm using a Transonic TWH-S1 Satellite Receiver and an LG 2018 model Smart TV. All or any help / feedback is most appreciated! Thank you</p>
<p>We moved into a new house this week and can't get Freeview to work at all (or Sky for that matter). We are just getting a "no signal" message no matter what we do. We can't get UHF reception in Blenheim, so this is via satellite. Any ideas? I'm using a Transonic TWH-S1 Satellite Receiver and an LG 2018 model Smart TV. All or any help / feedback is most appreciated! Thank you</p> Samsung TV with Freeview and sky tv dish direct. Can’t get TV3tag:freeviewforum.co.nz,2019-07-02:6513406:Topic:914292019-07-02T03:22:35.804ZStevehttps://freeviewforum.co.nz/profile/Steve667
<p>I have tuned in all Optus D1 channels 141 and can’t find TV3 </p>
<p>The tv has Freeview on demand app couldn’t find just straight Freeview app.? </p>
<p>When putting the same dish signal into sky decoder I can get TV3?</p>
<p>I want to send my sky decoder back but can’t yntil this is resolved.</p>
<p>Thanks</p>
<p>steve</p>
<p></p>
<p>I have tuned in all Optus D1 channels 141 and can’t find TV3 </p>
<p>The tv has Freeview on demand app couldn’t find just straight Freeview app.? </p>
<p>When putting the same dish signal into sky decoder I can get TV3?</p>
<p>I want to send my sky decoder back but can’t yntil this is resolved.</p>
<p>Thanks</p>
<p>steve</p>
<p></p> Prime TV has no signaltag:freeviewforum.co.nz,2017-08-28:6513406:Topic:755312017-08-28T04:48:45.674Zdavid adamsonhttps://freeviewforum.co.nz/profile/davidadamson
Since last night I cannot receive Prime TV. All others are Ok.<br />
I have retuned my Veon SAT 101 receiver but that made no difference.<br />
The EPG updates ok but there is no signal.<br />
Help
Since last night I cannot receive Prime TV. All others are Ok.<br />
I have retuned my Veon SAT 101 receiver but that made no difference.<br />
The EPG updates ok but there is no signal.<br />
Help Signal lost when using adaptor to convert RF type cable to Screw on F-type connectiontag:freeviewforum.co.nz,2016-06-27:6513406:Topic:632602016-06-27T03:12:30.439ZDanhttps://freeviewforum.co.nz/profile/Dan376
<p>Hi Team,</p>
<p>I recently moved our tv from the lounge to the bedroom. </p>
<p>In the lounge I was using a dish tv set top box (dish tv satBox S7070r) with a ftype connector screwed into the set top box's LNB in socket. This generated digital tv to my samsung 55in led hd tv which had no freeview built in (a few years old). All worked fine, all channels, clear picture etc Yay....</p>
<p>In our bedroom we have the older style RF connection (non screw on) & cable for generating a signal.…</p>
<p>Hi Team,</p>
<p>I recently moved our tv from the lounge to the bedroom. </p>
<p>In the lounge I was using a dish tv set top box (dish tv satBox S7070r) with a ftype connector screwed into the set top box's LNB in socket. This generated digital tv to my samsung 55in led hd tv which had no freeview built in (a few years old). All worked fine, all channels, clear picture etc Yay....</p>
<p>In our bedroom we have the older style RF connection (non screw on) & cable for generating a signal. However because the set top box only has the screw on type connection (no RF input) i needed an adaptor to convert RF to F-type coaxial connection so I could screw it in to the back of the set top box.</p>
<p>When I did so I get no signal. </p>
<p>I have tested the set top box, the tv, the rf cable, signal & all is working. The adaptor seems to be where the signal is lost between the cable & tje set top box. I have also returned & swapped the adaptor incase it was faulty. Still no signal. </p>
<p>Any ideas Team?</p>
<p>Thanks in advance. </p>
<p>Dan. </p> no signal after connecting via splittertag:freeviewforum.co.nz,2015-04-04:6513406:Topic:475512015-04-04T01:30:46.278Zlorayne bakerhttps://freeviewforum.co.nz/profile/loraynebaker
<p>hi</p>
<p>I have a konka tv with freeview built in, and I hooked it you to the working uhf outside ariel using a splitter to share with the main - working tv, the main tv still works but my tv still says no signal</p>
<p></p>
<p>any ideas? thanks</p>
<p>hi</p>
<p>I have a konka tv with freeview built in, and I hooked it you to the working uhf outside ariel using a splitter to share with the main - working tv, the main tv still works but my tv still says no signal</p>
<p></p>
<p>any ideas? thanks</p> No audio after latest updatetag:freeviewforum.co.nz,2014-03-19:6513406:Topic:350062014-03-19T18:09:17.226ZIvan Segedinhttps://freeviewforum.co.nz/profile/IvanSegedin
<p>the sound has gone after the last update.</p>
<p>how do I fix this?</p>
<p>the sound has gone after the last update.</p>
<p>how do I fix this?</p> No Signal issuestag:freeviewforum.co.nz,2013-08-11:6513406:Topic:165982013-08-11T09:15:03.842ZEddie Kilkennyhttps://freeviewforum.co.nz/profile/EddieKilkenny
<p>for the past week am finding TVOne almost impossible to get a signal to hold. Other channels mostly no problem but even 2 was a bit frozen tonight.</p>
<p>Aerial is a new install [ checked by professional for right orientation to Sky Tower Auckland ] but it is on a very low section of roof only about 3m off the ground.</p>
<p>Generally finding that even passing traffic is freezing the signal briefly on TVOne - but it is much worse today = No Signal on ONE [Rain?]</p>
<p>Suspecting aerial…</p>
<p>for the past week am finding TVOne almost impossible to get a signal to hold. Other channels mostly no problem but even 2 was a bit frozen tonight.</p>
<p>Aerial is a new install [ checked by professional for right orientation to Sky Tower Auckland ] but it is on a very low section of roof only about 3m off the ground.</p>
<p>Generally finding that even passing traffic is freezing the signal briefly on TVOne - but it is much worse today = No Signal on ONE [Rain?]</p>
<p>Suspecting aerial needs to be raised higher and there are some cabbage trees swaying on either side</p>
<p>Terrestrial set top box with UHF aerial</p>
<p>Can't believe how complicated this new system is :+((</p>