I have got a vision Asia set box and the sky disc .
Is it possible to set up the decoder to receive the Freeview by selection the installation / what are the values I have to set for LNB type, freq ( high and low),22k,disenchanted,LNB set ,position set and TP setup
I will be thankful for anyone help for this

Views: 602

Reply to This

Replies to This Discussion

If you have a exsiting sat dish get it check so that you can receive satellite D1 then use auto tune to find all the freeview channels , once scanning is complete remove all the sky channels as they may have a $ sign beside them and they will be unwatchable then delete any channels that come up more than once and you should then be left with around 16-17 viewable freeview channels

If you are a Vision Asia subscriber they do not use Optus D1

pay tv boxes like vision asia,ubi etc often will not show anything that doesnt have the proper coding in the signal

may work or may not

anyway lnb will probably be 10750 or maybe 11300 put them in hi and low

tp 12483, 12456, 12644, 12707 Horizontal s/r 22500 and fta search

22 khz off & doesnt matter what the sat is named

Thanks a lot
It works with your instruction

Reply to Discussion

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service