We have recently moved and the only TV reception sockets in our apartment are the screw-type like Sky satellite box connectors.

I've got a converter from the screw-on to a coax antenna socket but when I connect to the TV the screen initially shows the channel name and number but then after 2 or 3 seconds says no signal.  If I change the channel using the remote, it again shows the new channel name and number and then, after 2 or 3 seconds says no signal.

We are in a rented apartment and so don't have the obvious access to an aerial.

Does anyone have any ideas please?

Thanks

Views: 175

Reply to This

Replies to This Discussion

Are you sure its a Aerial socket it may be connected to a Satellite Dish.

I think it might be connected to a satellite dish. Is there anyway I can get a Freeview signal?

Thanks for getting back Paul.

If it's a dish only  then only if you use a Satellite STB.

Check with your building manager about the TV Signal distribution for the apartments.

I would have thought it would be normal to have UHF distrubution in apartments as well as Satellite. They could both be diplexed onto the same cable?

Impossible to diagnose your problem without inspecting the installation or checking with somebody who looks after the apartment complex.

P.S. Check with your neighbours?

I've cracked it - I auto-tuned and I guess it got the dish frequencies.

Thanks for looking people.

As I figured you probably have Sat and UHF distributed on the one cable. Auto tuning will have found the UHF signals OK. You'll only get Freeview Satellite if your TV has an inbuilt Satellite Tuner.



Reply to Discussion

RSS

Latest Activity

John Baird replied to Graeme's discussion Exactly what standards are used by Freeview in NZ....
"I have two Spectrum Analysers, both Unaohm , an AP01 an older B/w EP 314 and a handheld Satellite…"
2 hours ago
Anouska Menzies replied to Anouska Menzies's discussion Freeveiw plus gone another latest update
"Hi Thanks for the reply Internet connect is fine, I can search the web, use YouTube and go on…"
11 hours ago
Graeme replied to Graeme's discussion Exactly what standards are used by Freeview in NZ....
"Thanks for the link. :)"
20 hours ago
Graeme replied to Graeme's discussion Exactly what standards are used by Freeview in NZ....
20 hours ago
Josh Hill replied to Graeme's discussion Exactly what standards are used by Freeview in NZ....
"You can have a look at some of the specs for Freeview at this…"
21 hours ago
Josh Hill replied to Anouska Menzies's discussion Freeveiw plus gone another latest update
"Hi Anouska  Your Internet settings will need to be re-configured as the software might have…"
21 hours ago
david adamson replied to david adamson's discussion No signal TVNZ 1 and 2
"This morning all is back to normal and I have all channels back in operation. Nothing changed at my…"
23 hours ago
Satellite Networks Motueka replied to Graeme's discussion Exactly what standards are used by Freeview in NZ....
"In NZ we only have DVBS and DVBT . T2 (igloo) has shut down. Freeview is making noises about…"
23 hours ago

Connect With Us!

Notes

Test

Test Note

Created by Josh Hill Jul 24, 2017 at 11:37am. Last updated by Josh Hill yesterday.

Notes Home

Welcome! To view all notes, click here.

Created by Josh Hill Jul 24, 2017 at 11:36am. Last updated by Bel yesterday.

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service