I have a new S8200 Freeview Satbox.  Yesterday it was up and running perfectly all day. At night, I pushed the power switch on the box and it went to Standby.  This morning I pushed the power switch, but nothing happened.  I tried other switches but it stayed on Standby.  So I pull the power and rebooted.  It only comes alive to Standby after the reboot, which I have done several times.  So I am stuck on Standby.  Please help...RB

Views: 184

Reply to This

Replies to This Discussion

If it won't turn on with the switch on the box or the remote then take it back and get it replaced under warranty.

Reply to Discussion

RSS

Quick Tools

Latest Activity

Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Ah yes better picture quality on uhf, good point, I'd forgotten about that. Thanks for the…"
Friday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"Well Optus D2 is of no use anyway as Freeview and Sky are on Optus…"
Friday
Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Thx B, satellite only was my conclusion too, but still scratching my head around how the confusion…"
Friday
Josh Hill ✔️ replied to Rob Barr's discussion Sattelite or UHF?
"Hi Guys,  I am looking at a article to publish on this forum to help with the difference of…"
Friday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"P.S. If it's any help here is a screen shot of my Android Box settings for Optus D1."
Thursday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"It's a Satellite Receiver and no way will it work on UHF. Found a manual for it…"
Thursday
Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Part 2 ... the house has an old sky satellite on the roof, but not used for many years. I repaired…"
Thursday
Rob Barr posted a discussion

Sattelite or UHF?

Ok long story ... I've an arielbox ultra T1050PVR, which picks up UHF with good clarity. But every…See More
Thursday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service