Hi, i have purchased a near new dish tv sat box thinking i could just connect to the sky dish on my flat. It comes up to check the cable or the dish. My question is, if it works perfectly well on sky, why wouldn't it work on my freeview box? 

Cheers

Views: 214

Reply to This

Replies to This Discussion

Change the LNB type to 10750 or 10745  it is probably set to 11300 at the moment.

LNB adjustment Page 12 of the  Manual.

Also check that the loop cable is connected correctly.

The usual reason is the parameters don't match what your SKY box has. Most likely incorrect LNB frequency.

Reply to Discussion

RSS

Quick Tools

Latest Activity

Biggles replied to Marlene's discussion Obstruction from house
"You need a UHF antenna and the large house in the way shouldn't be a problem."
2 hours ago
Marlene posted a discussion

Obstruction from house

I have just moved to a unit which has a Sky satellite dish.  My tv has DVB-T input and I am told…See More
2 hours ago
Biggles replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"There's no J1 MUX in Auckland."
2 hours ago
Biggles replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"You can enter your address if you select "Live TV" then the "I don't know…"
2 hours ago
Gordon Stewart replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"From my testing, 1) i DO get THE EDGE, but i do not get the other MEDIAWORKS MUX. 2) i do NOT get…"
3 hours ago
Josh Hill ✔️ replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"Coverage checks can be found…"
4 hours ago
Josh Hill ✔️ replied to Maraea Robertson's discussion Lost Maori Channels
"Hi Maraera I have had a look at our reports and there are no issues with the transmission of Maori…"
4 hours ago
Maraea Robertson replied to Maraea Robertson's discussion Lost Maori Channels
"Yes done auto scan,"
6 hours ago

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service