Hi

Recently installed the 8200 all works fine, but I'm replacing a TopField that switched between two LBNs so I could view BVN on the D2 sat.  (So one cable coming down with the switcher close to the dish, worked great with the TopField)

Can you help me find out how to do this on the 8200 (if it can) I don't find the manual very helpful I can see the LBN setting but don't know which are appropriate)

I can see the D2 and when blind searching it shows a lot of assets but not in vertical mode, I also don't know how to bring up D2 after the search.

I'm aware that recording will be limited to one LBN at the time but would still like to be able to life view.

Views: 199

Reply to This

Replies to This Discussion

I believe you need to turn the 22khz switch to ON in the LNB setup screen.


Thanks Paul

I think I tried that once but will try again tonight, keep you posted.

Cheers

C


Paul said:

I believe you need to turn the 22khz switch to ON in the LNB setup screen.

Hi Paul

Got it to work, only problem is once it's switched over to the other LNB (D2 Vertical). It refuses to switch back to the other LNB that runs the the standard freeview channels.

I have to connect modish up to the Topfield to do the switchback and then things come right.

But of course I lose the D2 link again. Do I need a different switch box?

Hi Chris

Try turning on DiSEqc & Tone burst and see if that makes any difference.



Chris Verburg said:

Hi Paul

Got it to work, only problem is once it's switched over to the other LNB (D2 Vertical). It refuses to switch back to the other LNB that runs the the standard freeview channels.

I have to connect modish up to the Topfield to do the switchback and then things come right.

But of course I lose the D2 link again. Do I need a different switch box?

Remember it is designed for Freeview with freeviews middleware as opposed to being a FTA receiver with no middleware , my thoughts would be that it won't be reliable on the non Freeview channels may get dumped when a Freeview update is applied , do let us know how you do , you maybe better off with a stand alone box on D2 (a FTA one)

Thanks Robert

Got it work and see both satellites but BVN is invisible in the programme selector on the 8200.

For now, I have looped in the 8200 via the old Topfield and that does work, just a lot of messy switching (not spouse friendly) 
As expected the 8200 freezes up when switching to the other LNB, but when recording at the same time the recording carries on (can't quite get my head around that)

For the future I might wan't a update for the TopField that can record D2 separately, any brands/models come to mind?


Robert Hepple said:

Remember it is designed for Freeview with freeviews middleware as opposed to being a FTA receiver with no middleware , my thoughts would be that it won't be reliable on the non Freeview channels may get dumped when a Freeview update is applied , do let us know how you do , you maybe better off with a stand alone box on D2 (a FTA one)

Reply to Discussion

RSS

How do you receive Freeview?

How do you receive Freeview?
via Satellite Dish
via UHF aerial
Both
Unsure
doriddles

Quick Tools

Latest Activity

Marcia Crossland replied to Marcia Crossland's discussion Lost channels TV1/2/6/7 on 21/11/2017
"Hi Josh I have my channels back and all ok, tks for the feedback"
15 hours ago
Josh Hill ✔️ replied to Marcia Crossland's discussion Lost channels TV1/2/6/7 on 21/11/2017
"Hi Marcia, The channels have resumed however they are not stable and Kordia are working on a fix,…"
18 hours ago
Marcia Crossland posted a discussion

Lost channels TV1/2/6/7 on 21/11/2017

Have lost these channels today and when I finally got hold of someone on Freeview technical support…See More
18 hours ago
Josh Hill ✔️ replied to Marica Zoroja's discussion No signal
"Hi Marica  There has been an issue with the Auckland Waiatarua Transimission Site and…"
19 hours ago
Marica Zoroja posted a discussion

No signal

Have lost signal short while ago on 1,2,6 and 7 channels but other channels are ok. Anyone else's…See More
19 hours ago
Biggles replied to Daniel Marsh's discussion Can't get NZ Freeview channels only overseas ones.
"Sounds like your dish could be pointing at the wrong satellite. Were you receiving OK before you…"
yesterday
Daniel Marsh posted a discussion

Can't get NZ Freeview channels only overseas ones.

Hi I have got a new Freeview SatBox (Dish-TV S7070rHD-XM) and its only picking up overseas channels…See More
yesterday
Josh Hill ✔️ replied to Theageingrocker's discussion Should I replace the coax?
"Hi,  This shouldn't affect any performance of service of Freeview, as Willis mentioned,…"
yesterday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service