Hello

I recently moved house and gone from UHF to a satellite area. I have purchased a dish tv S8200 but and having trouble getting freeveiw. The satellite has a universal double LNB and I am getting some scramble sky channels listed but no FTA channels.

Views: 191

Reply to This

Replies to This Discussion

Was the dish known to be working before you moved in? If not then it could be a failing LNB.

Have you set the LO to 10600 ?
you mean 10750 tone/22khz off
No I mean 10600

Why 10600? Std LNB are 10750 or 11300. Never seen a 10600 one.

John Baird said:

No I mean 10600

I was getting signal in the universal band, which I thought was a bit weird and getting scrambled sky.

I had a look at the dish next door and it is setup the same.

I jumped up last night to have a look at alignment and found it is a 10750 LO, and not in the universal range so alignment is out.

The cable out on the LNB was down at about the 6.30 Mark so I twisted it around to about the 8 o'clock Mark and now getting freeveiw. 

Why 10600? Std LNB are 10750 or 11300. Never seen a 10600 one.

He said he had a universal LNB Biggles and that is the frequency needed to make it work



Biggles said:

Why 10600? Std LNB are 10750 or 11300. Never seen a 10600 one.

John Baird said:

No I mean 10600
Biggles,
A Universal LNB usually receives the signal in both the Low and High Sat bands. They have two oscillator frequencies to allow access to the bands. More common ones are 950/10600 with the 22KHz tone switching between the two oscillators. These LNBs are common in the EU as they have satellites that transmit in the low and high sat bands. To get to the high sat band, where the Freeview signal is at the moment, a setting of LO=10600+22KHz ON is necessary.

Reply to Discussion

RSS

Latest Activity

Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Thanks Willis. I tried this and got the same result. Then I checked the LNB to find the plastic…"
Thursday
willis replied to Tony Bowen's discussion satellite receiver stopped working
"See if it will switch on with the satellite cable unplugged If so then cable/ lnb suspect If not…"
Thursday
clifford c wright replied to clifford c wright's discussion missing tv1,tv2, duke on freeview.
Wednesday
Tony Bowen posted a discussion

satellite receiver stopped working

Is it time for a new receiver? My Strong SRT 4300 Digital Satellite Receiver has stopped working…See More
Wednesday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service