hi

I set my box satbox ultra s7090pvr to record tv1 and was watching prime channel 10 when the recording started on tv1 prime froze so I jogged up to prime channel 1021 and it was ok

what is the problem?

bill

Views: 865

Replies are closed for this discussion.

Replies to This Discussion

Is that a dual tuner set top box ??

Yes Steve

Hi William

It looks like there are some issues with how the channels have been tuned in on your receiver, My box did the same thing a few years ago. As you have Prime on non-Freeview allocated channel numbers.

Can you please try a retune of your channels, you can do this by your installation menu and auto tuning the channels, this should refresh and hopefully solve the Prime issue.

If that doesn't work, let me know and I will follow up with the team,

Cheers
Joshua

I did the tune up with the wizard and satellite strength was 80 and clarity 89
Nothing changed would I be better to forget ch 10 as I can get prime on ch 1021 1022 and 1023

Can you provide some details about the firmware, you can do this by Main Menu>System Configuration>Version

Hardware 2.1
Chip 4.1
Software a3u 11 016a
Loader ldr dish tv hw21 sw24
MoU dc
May 31 2014

Hi William

There is a new update which was released last month that may help your Prime duplications you can get more information here: http://www.dishtv.co.nz/support/downloads.htm

However the support desk has been notified.

Thanks for your help I will take a look at that
Bill

In your time, can push the info button twice on that recording that you make on TV One and information will appear, to help us with this case, could you please provide us a photograph or note down the information and reply that to us.

Cheers 

Video 515 mpeg2-sD 720x576 25fps 1.78mbps 1.78mbps
Audio 653 MPEG 0.02kbps
Optus d1 (160e)ku
Freeview
12483mhz 22500kdpsh
Signal strength 80 percent
Signal quality 92 percent

Opps, looks like that's the wrong information.

If you can go to a Prime recording which froze after recording TV One, go into library and highlight the recording and press the info button twice there and it will give a record property screen

No prime froze while I waswatching it
It was TVone that I had programmed to start at 7.30
When the recording started prime froze
The info I sent was for tvone

RSS

NETWORK STATUS ALERTS

See Network Status page for updates.

Freeview On Demand Changes Read More Here

Quick Links

© 2024   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service