Hi everyone

I have just moved to a new house and set up the Freeview receiver. When I go through the auto-select process in the left-hand pane it shows me the channels it is finding but when it is complete it says "No Signal."

Has anyone got any ides please?

Thanks

Views: 11078

Replies are closed for this discussion.

Replies to This Discussion

Hey Andrew,

Could be a number of things causing this - so we have all the details, please do the following & post back if you haven't resolved this yet:

1. Please go to www.freeviewnz.tv/coverage.aspx and do a coverage check with the full street address of your new house - what is the output?

2. What is the antenna you've got connected to your receiver? Is it a UHF aerial or a satellite dish?

3. What receiver are you using? Please state brand & model - thanks.

Thanks for getting back.

1 It says coverage is very likely with both aerial and satellite.

2 There are both antennae.  I've connected the TV to the aerial with a co-ax cable and we are receiving programmes. I'm not sure if it is Freeview or how to check. It's a newish TV - about 9 months old so probably has a Freeview receiver in it.

3 The receiver box connected to the satellite dish is a GEEOR (?) DS200.

Hi again Andrew,

Sorry I've let so much time lapse...it's been a busy few weeks.

Unfortunately the receiver you have is not Freeview-Approved, so there's no guarantee that it would/should work.

And I don't have any contact information for that particular brand which I can share with you - do you have any contact details for the distributor that you can refer your query to?

I would recommend:

1. Get a Freeview-Approved digital receiver;

2. Follow the instructions on the User Manual to tune in the device.

3. If you get the same error message, then you know it's to do with the aerial/connections - have a look at http://freeviewforum.co.nz/forum/topics/on-off-pixelation-across-al... for possible causes & contact an installer (installers do charge for their services but remember that once you get it set up correctly, you'll be able to enjoy free-viewing for years to come).

RSS

Quick Tools

Latest Activity

James Eaton replied to Josh Hill ✔️'s discussion Freeview launches set to transform TV
"Will we see updates to the firmware for the current Dish TV products? Don't want to buy one…"
2 hours ago
A discussion started by Josh Hill ✔️ was featured

Freeview launches set to transform TV

PRESS RELEASE | Thursday 19th October, 2017Freeview has today announced the launch of an innovative…See More
3 hours ago
Judy Drummond replied to Biggles's discussion Freeview EPG
"I had a phone call from someone living near asking to check our Freeview EPG and found we both have…"
14 hours ago
Biggles posted a discussion

Freeview EPG

Anybody else noticed the Freeview EPG wasn't available on the TVNZ MUX tonight (6pm) from…See More
15 hours ago
Josh Hill ✔️ replied to Marlene's discussion Obstruction from house
"Hi Marlene You should definitely get it tested out, ideally if you are in close proximity of…"
yesterday
Biggles replied to Marlene's discussion Obstruction from house
"You need a UHF antenna and the large house in the way shouldn't be a problem."
yesterday
Marlene posted a discussion

Obstruction from house

I have just moved to a unit which has a Sky satellite dish.  My tv has DVB-T input and I am told…See More
yesterday
Biggles replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"There's no J1 MUX in Auckland."
yesterday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service