I have just bought an Aeral Box T2200 but can't get a signal. I have a HDMI cable attached to the back but support said I need an aerial cable too. Is that correct and if so is that just between the TV and the aerial box?
I have an aerial not a satellite dish
My Smart Tv works fine
Any help would be appreciated

Views: 152

Reply to This

Replies to This Discussion

Page 9 of the manual shows you how to connect HDMI and a UHF Antenna.

Normally you would connect the UHF antenna to the T2200 and then run an antenna cable from the T2200 cable out socket to the TV's Antenna input socket.

Reply to Discussion

RSS

Quick Tools

Latest Activity

Biggles replied to Marlene's discussion Obstruction from house
"You need a UHF antenna and the large house in the way shouldn't be a problem."
2 hours ago
Marlene posted a discussion

Obstruction from house

I have just moved to a unit which has a Sky satellite dish.  My tv has DVB-T input and I am told…See More
2 hours ago
Biggles replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"There's no J1 MUX in Auckland."
2 hours ago
Biggles replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"You can enter your address if you select "Live TV" then the "I don't know…"
2 hours ago
Gordon Stewart replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"From my testing, 1) i DO get THE EDGE, but i do not get the other MEDIAWORKS MUX. 2) i do NOT get…"
3 hours ago
Josh Hill ✔️ replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"Coverage checks can be found…"
4 hours ago
Josh Hill ✔️ replied to Maraea Robertson's discussion Lost Maori Channels
"Hi Maraera I have had a look at our reports and there are no issues with the transmission of Maori…"
4 hours ago
Maraea Robertson replied to Maraea Robertson's discussion Lost Maori Channels
"Yes done auto scan,"
6 hours ago

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service