I have the programme guide for Maori TV, but when I change to the channel I get "No Event Information"

When I try to set a programme to record using the "Guide" button I get an error saying "This programme cannot be booked at this time. Please try again later. (code - 2)

Can someone contact Maori TV and get them to fix this please

Views: 148

Reply to This

Replies to This Discussion

Or you could just use Timer Record instead.

This happens quite a lot and is usually fixed with the next EPG update.


I thought about that and - do you know what? I couldn't be bothered and used On Demand instead.


Biggles said:

Or you could just use Timer Record instead.

This happens quite a lot and is usually fixed with the next EPG update.

Hi

Maori TV has been making changes to their broadcast, you can try a factory default on the unit to try to correct this as this will force the unit to collect the latest EPG data. Factory default can be done in the menu - installation - factory default, the password to do this is 0000. You just need to press the OK button on the welcome screen that comes up to get it to scan the channels again. If this problem persists please contact our support desk, support@dishtv.co.nz

-Luke


Thanks Luke - I may give it a few days to see if it gets fixed as a Factory Reset will loose all my recording settings and I would have to set them up again.


Dish TV Support said:

Hi

Maori TV has been making changes to their broadcast, you can try a factory default on the unit to try to correct this as this will force the unit to collect the latest EPG data. Factory default can be done in the menu - installation - factory default, the password to do this is 0000. You just need to press the OK button on the welcome screen that comes up to get it to scan the channels again. If this problem persists please contact our support desk, support@dishtv.co.nz

-Luke

Maori Television and Te Reo have moved multiplexes and some receivers aren't reflecting the new location of the services and are still pointing to the old one. You'll need to do a rescan to force the receiver to pick up the new services.

Reply to Discussion

RSS

Quick Tools

Latest Activity

Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Ah yes better picture quality on uhf, good point, I'd forgotten about that. Thanks for the…"
Friday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"Well Optus D2 is of no use anyway as Freeview and Sky are on Optus…"
Friday
Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Thx B, satellite only was my conclusion too, but still scratching my head around how the confusion…"
Friday
Josh Hill ✔️ replied to Rob Barr's discussion Sattelite or UHF?
"Hi Guys,  I am looking at a article to publish on this forum to help with the difference of…"
Friday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"P.S. If it's any help here is a screen shot of my Android Box settings for Optus D1."
Thursday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"It's a Satellite Receiver and no way will it work on UHF. Found a manual for it…"
Thursday
Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Part 2 ... the house has an old sky satellite on the roof, but not used for many years. I repaired…"
Thursday
Rob Barr posted a discussion

Sattelite or UHF?

Ok long story ... I've an arielbox ultra T1050PVR, which picks up UHF with good clarity. But every…See More
Thursday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service