I have the programme guide for Maori TV, but when I change to the channel I get "No Event Information"

When I try to set a programme to record using the "Guide" button I get an error saying "This programme cannot be booked at this time. Please try again later. (code - 2)

Can someone contact Maori TV and get them to fix this please

Views: 154

Reply to This

Replies to This Discussion

Or you could just use Timer Record instead.

This happens quite a lot and is usually fixed with the next EPG update.


I thought about that and - do you know what? I couldn't be bothered and used On Demand instead.


Biggles said:

Or you could just use Timer Record instead.

This happens quite a lot and is usually fixed with the next EPG update.

Hi

Maori TV has been making changes to their broadcast, you can try a factory default on the unit to try to correct this as this will force the unit to collect the latest EPG data. Factory default can be done in the menu - installation - factory default, the password to do this is 0000. You just need to press the OK button on the welcome screen that comes up to get it to scan the channels again. If this problem persists please contact our support desk, support@dishtv.co.nz

-Luke


Thanks Luke - I may give it a few days to see if it gets fixed as a Factory Reset will loose all my recording settings and I would have to set them up again.


Dish TV Support said:

Hi

Maori TV has been making changes to their broadcast, you can try a factory default on the unit to try to correct this as this will force the unit to collect the latest EPG data. Factory default can be done in the menu - installation - factory default, the password to do this is 0000. You just need to press the OK button on the welcome screen that comes up to get it to scan the channels again. If this problem persists please contact our support desk, support@dishtv.co.nz

-Luke

Maori Television and Te Reo have moved multiplexes and some receivers aren't reflecting the new location of the services and are still pointing to the old one. You'll need to do a rescan to force the receiver to pick up the new services.

Reply to Discussion

RSS

Quick Tools

Latest Activity

James Eaton replied to James Eaton's discussion Sound problems on all TVNZ channels
"This may be an intermittent problem there have been several reports from others on the Neighbourly…"
19 hours ago
Philip Lodewick Olivier replied to Philip Lodewick Olivier's discussion Problems with Dish TV s7070r decoder.
"Followed some of the advice on this forum and did a "Factory Default" reset, tried again…"
19 hours ago
James Eaton replied to James Eaton's discussion Sound problems on all TVNZ channels
"So it is all fixed now. (19:00)"
21 hours ago
James Eaton posted a discussion

Sound problems on all TVNZ channels

Transmitter is Ngarara in WaikanaeOnce again the sound is out of sync with the video on TVNZ…See More
22 hours ago
Maureen Seth replied to Maureen Seth's discussion aerialBox-mini T1000 no longer working
"Thanks for your advice. I decided to upgrade to the T2200 anyway. I think the T1000 has had it."
yesterday
Maureen Seth replied to Maureen Seth's discussion Receiver or Recorder?
"Thank you, Josh. I went ahead and bought the T2200, & am very happy with it."
yesterday
Philip Lodewick Olivier posted a discussion

Problems with Dish TV s7070r decoder.

Have a problem with my daughter's decoder. I disconnect my decoder (Veon 101) and replace it with…See More
yesterday
Josh Hill ✔️ replied to Maureen Seth's discussion aerialBox-mini T1000 no longer working
"Dish TV are the people to go to for support about that particular device. They will be able to…"
yesterday

Connect With Us!

© 2018   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service