Hi everyone...I hope someone can help me.

I recently purchased a Dish T2200 and installed it without any issues, received all channels crystal clear and then suddenly a couple of nights ago I lost most channels. Tried several times to autoscan, factory reset to no avail.

Then this morning I was able to autoscan and receive all channels perfectly.

Now this evening I have lost channel 3, 4, 3plus1,Bravo, Duke.

I am situated in Auckland.

Am I missing something here? This is incredibly frustrating!

Sue

Views: 165

Reply to This

Replies to This Discussion

What sort of antenna do you have? Sounds like an antenna/cabling problem as you are missing just one MUX which would indicate marginal signal strength or interference.

Thanks for reply! It is an outside UHF aerial. What sorts of things can cause interference, do you know?

Hmmmm....maybe need to get the "aerial man" in.......

Sue

OK. Check signal strength for each MUX in the T2200 setup menu and post results. Pg38 of the Manual - Manual Scan.

Interference is usually caused by new cellphone band and suppressors are available.

https://www.jaycar.co.nz/fl694lp-4g-lte-tv-antenna-signal-filter-f-...

Can you upload a picture of the antenna?

The aerial...tah dah!!!  I have gone into the menu and can't find a page 38????

Biggles said:

OK. Check signal strength for each MUX in the T2200 setup menu and post results. Pg38 of the Manual - Manual Scan.

Interference is usually caused by new cellphone band and suppressors are available.

https://www.jaycar.co.nz/fl694lp-4g-lte-tv-antenna-signal-filter-f-...

Can you upload a picture of the antenna?

Antenna looks OK. Same as mine.

Pg 37/38 of the Manual, not Menu.

http://www.dishtv.co.nz/image/catalog/UserManuals/aerialBox_T2200_U...

Sue Hutchings said:

The aerial...tah dah!!!  I have gone into the menu and can't find a page 38????

Reply to Discussion

RSS

Quick Tools

Latest Activity

Paul replied to Paul's discussion [SOLVED] 2008 model Sony Freeview TV fails to properly render Maori / Te Reo HD channels
"I’m very happy to see that this issue has finally been resolved.  Thanks to Mark…"
6 hours ago
Biggles replied to Stuart Mackay's discussion New home, existing satellite dish and new Dish-TV S8100
"You probably need to change the LNB Frequency in your setup menu. If you can get on the roof you…"
Wednesday
Josh Hill ✔️ replied to Stuart Mackay's discussion New home, existing satellite dish and new Dish-TV S8100
"Hi Stuart,  SKY doesn't block satellite dish's, I would check on a few things…"
Wednesday
Stuart Mackay posted a discussion

New home, existing satellite dish and new Dish-TV S8100

Hi all,Just moved into a new property in Wellington which has an existing Sky satellite (last…See More
Wednesday
Carole replied to Murray Glue's discussion Dish TV and S7070rHD-XM
"Thanks Murray that makes me feel a lot better! I've also managed to resolve my problem with a…"
Tuesday
Murray Glue replied to Murray Glue's discussion Dish TV and S7070rHD-XM
"Please disregard the above. I got hold of a man with a tuning box with which we found that the dish…"
Tuesday
Murray Glue replied to Murray Glue's discussion Dish TV and S7070rHD-XM
"I agree Carole, and I am a technician with experience in satellite tracking systems in marine…"
Monday
Carole replied to Murray Glue's discussion Dish TV and S7070rHD-XM
"I don't find the manual at all simple to follow. It is written in technical geekspeak which…"
Monday

Connect With Us!

© 2018   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service