Hi everyone...I hope someone can help me.

I recently purchased a Dish T2200 and installed it without any issues, received all channels crystal clear and then suddenly a couple of nights ago I lost most channels. Tried several times to autoscan, factory reset to no avail.

Then this morning I was able to autoscan and receive all channels perfectly.

Now this evening I have lost channel 3, 4, 3plus1,Bravo, Duke.

I am situated in Auckland.

Am I missing something here? This is incredibly frustrating!

Sue

Views: 119

Reply to This

Replies to This Discussion

What sort of antenna do you have? Sounds like an antenna/cabling problem as you are missing just one MUX which would indicate marginal signal strength or interference.

Thanks for reply! It is an outside UHF aerial. What sorts of things can cause interference, do you know?

Hmmmm....maybe need to get the "aerial man" in.......

Sue

OK. Check signal strength for each MUX in the T2200 setup menu and post results. Pg38 of the Manual - Manual Scan.

Interference is usually caused by new cellphone band and suppressors are available.

https://www.jaycar.co.nz/fl694lp-4g-lte-tv-antenna-signal-filter-f-...

Can you upload a picture of the antenna?

The aerial...tah dah!!!  I have gone into the menu and can't find a page 38????

Biggles said:

OK. Check signal strength for each MUX in the T2200 setup menu and post results. Pg38 of the Manual - Manual Scan.

Interference is usually caused by new cellphone band and suppressors are available.

https://www.jaycar.co.nz/fl694lp-4g-lte-tv-antenna-signal-filter-f-...

Can you upload a picture of the antenna?

Antenna looks OK. Same as mine.

Pg 37/38 of the Manual, not Menu.

http://www.dishtv.co.nz/image/catalog/UserManuals/aerialBox_T2200_U...

Sue Hutchings said:

The aerial...tah dah!!!  I have gone into the menu and can't find a page 38????

Reply to Discussion

RSS

Quick Tools

Latest Activity

willis replied to Maraea Robertson's discussion Lost Maori Channels
"If you..manually search ch 39(618.00 mhz) should be right someones left the bit out of network info…"
1 hour ago
Josh Hill ✔️ replied to Josh Hill ✔️'s discussion Freeview launches set to transform TV
"Hey James,  Thats a question for Dish TV, not us.  CheersJosh"
15 hours ago
Biggles replied to Maraea Robertson's discussion Lost Maori Channels
"Maybe you should be tuning…"
16 hours ago
Brian Gray replied to Maraea Robertson's discussion Lost Maori Channels
"Same problem on my Panasonic TH-55DX here in Rotorua. Auto scan picks up all channels except Maori…"
18 hours ago
willis replied to Josh Hill ✔️'s discussion Freeview launches set to transform TV
"a lot of new stuff takes quite a while to shake out all the bugs"
yesterday
willis replied to Biggles's discussion Freeview EPG
"EPG issue yesterday on Panasonic TV and dish t 1050 would ignore EPG button on tvnz MUX,please…"
yesterday
James Eaton replied to Josh Hill ✔️'s discussion Freeview launches set to transform TV
"Will we see updates to the firmware for the current Dish TV products? Don't want to buy one…"
yesterday
A discussion started by Josh Hill ✔️ was featured

Freeview launches set to transform TV

PRESS RELEASE | Thursday 19th October, 2017Freeview has today announced the launch of an innovative…See More
yesterday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service