We have the above Free view Box and are unable to record for some reason.

We are able to set programs in as a Series Link but on the Record List - it stays blank ie no start or end time and no program name as before.

Any ideas most appreciated.

Views: 68

Reply to This

Replies to This Discussion

Have you tried resetting the device? a reset may clear any issues with the guide and starts the device as fresh, alternatively you can switch the unit off and on and try again. 

Kind Regards

Josh

Hi Josh

Thanks for replying earlier.  Have been away hence delay.

I reset the Homecast to Factory Settings and seems to be all ok except that some programs will not allow me to set 'Record' and are showing an error reading "Code-2 error' - Any ideas re this?

Thank you, Jenny

Reply to Discussion

RSS

Latest Activity

Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Problem solved with a new lnb, cable and receiver. Delighted to say I got a signal straight away…"
Monday
Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Thanks Willis. I tried this and got the same result. Then I checked the LNB to find the plastic…"
May 17
willis replied to Tony Bowen's discussion satellite receiver stopped working
"See if it will switch on with the satellite cable unplugged If so then cable/ lnb suspect If not…"
May 17
clifford c wright replied to clifford c wright's discussion missing tv1,tv2, duke on freeview.
May 17

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service