Hi guys, I have a Dish-Tv S8100-ZA desktop box and have connected a 3T self powered hard-drive to record shows. When I try to format the drive, I select yes to format, add required password and then unit states “media format cancelled”. The instructions haven’t stated a maximum hard-drive size, just that they need to be externally power. Any help rectifying this problem and enabling me to use hard-drive would be greatly appreciated.

Views: 73

Reply to This

Replies to This Discussion

Hi Lance

I would say you have Zero chance of getting a 3Tb to work with your Dish-Tv S8100-ZA these STB's only support Fat32 and 3tb is way off the limitations of Fat32 .

There's also another  problem with USB Powered HDDs as on most STBs they often just don't have enough current capability to power them satisfactorily. It's always advisable to use external power for external USB HDDs unless the box it's plugged in to is definitely known to have sufficient power to run them.

The hard-drive is externally power as recommended, however there’s no maximum hard-drive size recommended in the instructions which is why I purchased the current hard-drive.

OK so power is not a problem but FAT32 only supports up to 2tb basic drives. You'll need to partition the drive to 2tb max. I don't know if the STB will support 2 x 1.5tb partitions on a USB HDD. They all seem to be rather fussy on what's plugged in and will work on USB.

See if you can partition it for 2 drives maybe tv recording and computer backup
Or get a 1 tb drive
Thanks Biggles, I have to give that ago, I didn’t know FAT32 only supports up to 2tb and would have liked the instructions to say Max. 2tb as I looked for such advice.

Reply to Discussion

RSS

Latest Activity

Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Problem solved with a new lnb, cable and receiver. Delighted to say I got a signal straight away…"
yesterday
Tony Bowen replied to Tony Bowen's discussion satellite receiver stopped working
"Thanks Willis. I tried this and got the same result. Then I checked the LNB to find the plastic…"
Thursday
willis replied to Tony Bowen's discussion satellite receiver stopped working
"See if it will switch on with the satellite cable unplugged If so then cable/ lnb suspect If not…"
Thursday
clifford c wright replied to clifford c wright's discussion missing tv1,tv2, duke on freeview.
Wednesday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service