I have purchased a Dish antenna which is proudly sitting on the roof, aligned approximately to the Optus D1 azimuth and elevation. I have a Pansonic TH-24A400Z TV purchased second hand and which is  waiting for collection. What I need to know from somebody, please, is whether I need a blackl box device to match the dish LNB into this particular TV or not. Nobody seems to be able to tell me. The LNB Output is 950Mhz to 1450 Mhz. Thanks in anticipation....

Views: 195

Reply to This

Replies to This Discussion

It doesn't have a sat tuner so you will need either a Sat Box between the Dish and the TV or UHF antenna direct to TV..

https://www.panasonic.com/nz/support/product-archives/product-archi...

Thanks, that is what I suspected. I feel silly having bought the TV on trademe only to find out that the TVs of this family are pretty well rubbished for picture quality by Consumer in its latest magazine review. When I receive it I will try it out and maybe write it off as a bad decision. Further to your comments, we have only satellite coverage here in the far north, so UHF cannot be used.

Reply to Discussion

RSS

Latest Activity

Robyn Stirling posted a discussion

Games channel

My Freeview has tv 1+1 on channel 14, and channel 6 which should be 1+1 has the games logo which…See More
7 hours ago
Biggles replied to John Kirkbride's discussion TV 3 6PM News Recording Problem
"My Panasonic did the same recently and has also done so occasionally in the past. Was set to record…"
yesterday
Cliff Baker replied to Jared's discussion tvnz ondmend
"I think the previous firmware was actually 3.925 from October 2017 so you hadn't missed out on…"
yesterday
John Kirkbride posted a discussion

TV 3 6PM News Recording Problem

Have a couple of Panasonic DVR's and have had recurring problems since 2013 with recording the news…See More
yesterday

Connect With Us!

© 2018   Created by Bel @ Freeview.   Powered by

Badges  |  Report an Issue  |  Terms of Service