Hi every few minutes a sign pops up on my screen saying new S/W is available,do you want to install.If I press appropriate buttons to install it keeps popping up again.If I say no It will then turn my screen off for quite a while and repeat the same thing...What can I do to stop this reoccuring all the time.

Views: 394

Replies are closed for this discussion.

Replies to This Discussion

What is the make and model of your freeview  box ?

Hi Paul Its My Freeview SatBox Ultra 87090pvr ....

Hi Pamela,

It's an S7090, DishTV satellite PVR.

I had a similar problem with the same model receiver at a customer's place last week.

The receiver is probably trying to download the new "Prime" upgrade for you. - In my customer's case, the receiver had downloaded the transponder details, but wasn't getting a signal on the 12707 transponder. We had to alter the LNB "skew" (on the roof, at the dish) so the receiver could pick up a signal, to allow it to download the new Prime channel.

You could ring DishTV at 07-929-4123 in case they can help you at the receiver itself, but I suspect you will have to get an installer out to adjust the LNB on your dish.

Cheers,   Bill.



Bill McMurray said:

Hi Pamela,

It's an S7090, DishTV satellite PVR.

I had a similar problem with the same model receiver at a customer's place last week.

The receiver is probably trying to download the new "Prime" upgrade for you. - In my customer's case, the receiver had downloaded the transponder details, but wasn't getting a signal on the 12707 transponder. We had to alter the LNB "skew" (on the roof, at the dish) so the receiver could pick up a signal, to allow it to download the new Prime channel.

You could ring DishTV at 07-929-4123 in case they can help you at the receiver itself, but I suspect you will have to get an installer out to adjust the LNB on your dish.

Cheers,   Bill.

Thanks Folk s will get someone in to do as you recommended.Merry Christmas to one and all ..

RSS

Quick Tools

Latest Activity

James Eaton replied to Josh Hill ✔️'s discussion Freeview launches set to transform TV
"Will we see updates to the firmware for the current Dish TV products? Don't want to buy one…"
2 hours ago
A discussion started by Josh Hill ✔️ was featured

Freeview launches set to transform TV

PRESS RELEASE | Thursday 19th October, 2017Freeview has today announced the launch of an innovative…See More
3 hours ago
Judy Drummond replied to Biggles's discussion Freeview EPG
"I had a phone call from someone living near asking to check our Freeview EPG and found we both have…"
14 hours ago
Biggles posted a discussion

Freeview EPG

Anybody else noticed the Freeview EPG wasn't available on the TVNZ MUX tonight (6pm) from…See More
15 hours ago
Josh Hill ✔️ replied to Marlene's discussion Obstruction from house
"Hi Marlene You should definitely get it tested out, ideally if you are in close proximity of…"
yesterday
Biggles replied to Marlene's discussion Obstruction from house
"You need a UHF antenna and the large house in the way shouldn't be a problem."
yesterday
Marlene posted a discussion

Obstruction from house

I have just moved to a unit which has a Sky satellite dish.  My tv has DVB-T input and I am told…See More
yesterday
Biggles replied to Gordon Stewart's discussion HGTV not on K1 MUX.
"There's no J1 MUX in Auckland."
yesterday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service