Hi Guys

 We have released firmware updates to address the TVNZ OnDemand issue.  Please check and install the following updates (released Sat 17 Jun):

  • AerialBox T2200 firmware version v1.40;
  • SatBox S8200 firmware version v1.31;

If your recorder has not updated, please power off the recorder at the wall and power back on again to force the unit to look for new firmware as it boots.  Latest updates can also be found on the DISH TV Facebook Page here.

Thank you for your patience

Views: 101

Replies are closed for this discussion.

Quick Tools

Latest Activity

wayne morris replied to wayne morris's discussion freeview tuning
13 minutes ago
wayne morris replied to wayne morris's discussion freeview tuning
15 minutes ago
Biggles replied to wayne morris's discussion freeview tuning
"If you tried both and it doesn't show a signal then there is some other problem. Could be the…"
2 hours ago
Paul replied to wayne morris's discussion freeview tuning
"try 10745  the LNB my have drifted .."
3 hours ago
wayne morris replied to wayne morris's discussion freeview tuning
3 hours ago
wayne morris replied to wayne morris's discussion freeview tuning
3 hours ago
Josh Hill ✔️ replied to wayne morris's discussion freeview tuning
"Hi Wayne  It could be the LNB settings you need to adjust there are two common frequencies…"
3 hours ago
Biggles replied to wayne morris's discussion freeview tuning
"Your LNB may be 11300mhz, not 10750. Try 11300 instead."
3 hours ago

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service