Please help! I have a Sharp Aquos (1 year old) and despite running multiple channel searches/auto channel updates Prime is not appearing in my list of channels...however I have got Bravo +1 and Edge TV channels. Can anyone please help me?! Info that might be handy:

- I tried a manual search of the Prime MHz frequency however my TV can only accept a frequency that's formatted XXX.X (the Prime frequency is 5 digits, no decimal). But I'm sure Bravo +1 and Edge are on the same frequency as Prime, and I have those two channels...

- TV model: Sharp AQUOS, LC-46LE840X

- I live in an apartment with one aerial for the building. I'm pretty sure this is a digital aerial.

- Freeview is built into the TV

- I'm told Prime should be channel 10...I don't have a channel 10! (presumably because nothing has populated it)

Many thanks in advance!

Views: 565

Reply to This

Replies to This Discussion

Prime is not on same MUX as Bravo, Edge etc. It's with Choice etc.

http://freeviewforum.co.nz/tip/mux

The frequency is not 5 digits.

You'll find frequencies here. http://www.rsm.govt.nz/online-services-resources/pdf-and-documents-...

Tune the midpoint of the range shown. e.g. CH27 would be 522.0 For Auckland (Waiatarua) I think Prime is on CH27 Kordia.

Hi Biggles, thanks so much for your help. Unfort no luck. I found Ch27, however it was the Hope Channel (how ironic).

I found the 5 digit frequency here (right at the bottom of page): http://freeviewforum.co.nz/page/prime-sat-changes

It says: The new transponder frequency for PRIME, Bravo plus 1 and THE EDGE will be 12519 Mhz.

What have I missed?!

Many thanks again.

You presume right. Contact your building manager the problem is obviously local. ask your neighbours if they have the same issues. The frequency12519  you are trying to scan is for satellite. . prime is on 10.

That is the freq for Prime, Edge etc on Freeview Satellite, not UHF. Your TV is UHF. The table in the link shows the UHF frequencies for Freeview across NZ.

Hence the need to tune UHF CH27 (522.0) on your TV. If Prime isn't on that MUX then try the other Kordia MUX Ch37 (602.0mhz). It should be on one of those.

Tune your TV to CH27 (522.0mhz) then select CH10 on your remote.

CH 27 on your remote is a logical channel and not the real on-air channel your TV tunes.

Your TV will tune 4 or 5 real Channels with multiple streams on each. These multiple streams are then ordered into Logical channels which are selected by your remote. Most people easily confuse the real MUX channels with the many Logical (Virtual) channels.

+1

I missed the bit in your post about being in an apartment. Contact your building manager for help. Quite often apartments will have one antenna/dish with multiple receivers and a distribution system so that what channel numbers you will receive in each apartment bear no relation to the actual transmitted channel numbers.

Satellite Networks Motueka said:

You presume right. Contact your building manager the problem is obviously local. ask your neighbours if they have the same issues. The frequency12519  you are trying to scan is for satellite. . prime is on 10.

Have a look here and you'll see where I've collated and listed the Channel Lineup on Auckland (Waiatarua) Freeview

http://freeviewforum.co.nz/forum/topics/auckland-waiatarua-channel-...

Thanks so much for your further help on this Biggles, I'll give your above suggestions a go tonight! I did tune 522 last night but it came up with CH27 automatically and it didn't appear I could change that channel number...but I'll try 602 tonight.

We don't have a building manager but I will definitely ask the neighbours!

Prime is definitely on CH37 602mhz Waiatarua. Checked earlier today.

CH 37 (602Mhz) Maori, Parliament, Chinese TV, PRIME, TV33, Choice, TeReo, Shopping, Firstlight, RNZ Concert, Base FM.

Reply to Discussion

RSS

How do you receive Freeview?

How do you receive Freeview?
via Satellite Dish
via UHF aerial
Both
Unsure
doriddles

Quick Tools

Latest Activity

Lorilei replied to Marica Zoroja's discussion No signal
"Could this possibly be why I am unable to receive TVNZ channels in Napier?"
5 hours ago
Marcia Crossland replied to Marcia Crossland's discussion Lost channels TV1/2/6/7 on 21/11/2017
"Hi Josh I have my channels back and all ok, tks for the feedback"
yesterday
Josh Hill ✔️ replied to Marcia Crossland's discussion Lost channels TV1/2/6/7 on 21/11/2017
"Hi Marcia, The channels have resumed however they are not stable and Kordia are working on a fix,…"
yesterday
Marcia Crossland posted a discussion

Lost channels TV1/2/6/7 on 21/11/2017

Have lost these channels today and when I finally got hold of someone on Freeview technical support…See More
yesterday
Josh Hill ✔️ replied to Marica Zoroja's discussion No signal
"Hi Marica  There has been an issue with the Auckland Waiatarua Transimission Site and…"
yesterday
Marica Zoroja posted a discussion

No signal

Have lost signal short while ago on 1,2,6 and 7 channels but other channels are ok. Anyone else's…See More
yesterday
Biggles replied to Daniel Marsh's discussion Can't get NZ Freeview channels only overseas ones.
"Sounds like your dish could be pointing at the wrong satellite. Were you receiving OK before you…"
yesterday
Daniel Marsh posted a discussion

Can't get NZ Freeview channels only overseas ones.

Hi I have got a new Freeview SatBox (Dish-TV S7070rHD-XM) and its only picking up overseas channels…See More
Monday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service