Is it my TV, my FreeView or two of the providers?

Last night (10 Oct 17) at around 8 to 9pm three different channels had total sound disasters.

There would be  little burst of sound then nothing for a second or two. This would repeat over and over and there was no chance of watching any of the channels

It affected TV1+1, TV2+1 and Duke. All other channels were perfectly fine.

I receive my content by aerial from the central Hamilton site and have experienced this before.

My TV is a Samsung Series 4+ PS43D450 and is around 6 years old.

I tried powering my TV down for a period, - no change - all these channels behaved the same

I tried doing a digital retune with the same outcome

I have attached a short example captured on my iphone

Views: 85

Attachments:

Reply to This

Replies to This Discussion

Hi Bob, 

Thankyou for posting that video, I have had a look into it and it's definitely not normal. Checking this morning, is the distortion still the same or is the audio now coming through clear? 

If it's isolated to only the TVNZ Plus 1 channels and Duke then there might have been a little glitch from the transmitter or from TVNZ however could you pass through the area you are living in and the transmission tower you are receiving Freeview from (If in Auckland) 

Thanks

Josh

Replied by email but

No, problem has gone today and all channels are perfect in every regard.

Fortunately the problem was not on a channel I had wanted to see.

In the past have seen many other problems too with freeview. The worst is  sound/vision synch.

I have seen it on some channels with 2 or more seconds of delay.

Love to know what was happening - was it my TV, the local Transmitter, the connection to the video supplier, or within the TVNZ location itself?

Bob J.

Look at your arial - 7 check the horizontal / vertical polarity of it. 

Landlord came round today, fixed the polarity & my signal strength has dramatically increased. A few days ago, i saw a web page with pictures / examples. But i cant find it now.

you can check polarity here -  http://www.freeviewshop.co.nz/digital-terrestrial-i-8.html

Reply to Discussion

RSS

Quick Tools

Latest Activity

Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Ah yes better picture quality on uhf, good point, I'd forgotten about that. Thanks for the…"
Friday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"Well Optus D2 is of no use anyway as Freeview and Sky are on Optus…"
Friday
Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Thx B, satellite only was my conclusion too, but still scratching my head around how the confusion…"
Friday
Josh Hill ✔️ replied to Rob Barr's discussion Sattelite or UHF?
"Hi Guys,  I am looking at a article to publish on this forum to help with the difference of…"
Friday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"P.S. If it's any help here is a screen shot of my Android Box settings for Optus D1."
Thursday
Biggles replied to Rob Barr's discussion Sattelite or UHF?
"It's a Satellite Receiver and no way will it work on UHF. Found a manual for it…"
Thursday
Rob Barr replied to Rob Barr's discussion Sattelite or UHF?
"Part 2 ... the house has an old sky satellite on the roof, but not used for many years. I repaired…"
Thursday
Rob Barr posted a discussion

Sattelite or UHF?

Ok long story ... I've an arielbox ultra T1050PVR, which picks up UHF with good clarity. But every…See More
Thursday

Connect With Us!

© 2017   Created by Bel.   Powered by

Badges  |  Report an Issue  |  Terms of Service